Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: LEDBlinky - GenLEDBlinkyInputMap issues  (Read 1677 times)

0 Members and 1 Guest are viewing this topic.

Wavfact

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:March 13, 2025, 08:23:09 am
  • I want to build my own arcade controls!
LEDBlinky - GenLEDBlinkyInputMap issues
« on: January 13, 2025, 07:09:23 am »
When setting up my buttons and ports, everything works fine till I get to port 49, after that, RED and BLUE are reversed..  The button lights up blue when it is set to RED.. and shows RED when the button is set to blue..  GREEN is fine..  I checked my wiring all all is correct.  Is this an LEDBlink issue? or am I missing something?
Logged

Fursphere

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1267
  • Last login:July 12, 2025, 03:05:16 pm
Re: LEDBlinky - GenLEDBlinkyInputMap issues
« Reply #1 on: January 16, 2025, 10:49:06 pm »
Thats because the wiring is flipped on the other side of the board.

If the button lights up BLUE, set the config map to BLUE.  Trust your eyes! 

I was literally just setting this up on my four player setup like 10 minutes ago.  lol   Good timing.  :cheers:
Logged
Pages: [1]
  
Go Up
« previous next »