Author Topic: Need custom CPO printed from somewhere (Read 11462 times)

excaliburlives · « **on:** May 14, 2023, 07:36:38 pm »

I just had a custom CPO made for me. Now i need it to get it printed somewhere. Who is the best out there right now?

SNAAKE · « **Reply #1 on:** May 15, 2023, 01:04:24 pm »

if you need laminated then gameongraphix

if your panel is under 24" and dont need laminated then I can do it. PM if interested. I have some matte finish sticker paper in stock and semi gloss satin paper(non sticky).

excaliburlives · « **Reply #2 on:** May 15, 2023, 08:11:51 pm »

Thanks for the reply. Yeah, i need 36" x 18". Sorry.

SNAAKE · « **Reply #3 on:** May 16, 2023, 02:06:16 pm »

Quote from: excaliburlives on May 15, 2023, 08:11:51 pm

Thanks for the reply. Yeah, i need 36" x 18". Sorry.

I can do that. 18" is good for my 24" printer

ive been using this for arcade projects.
https://www.lexjet.com/lexjet-toughcoat-water-resistant-self-adhesive-polypropylene-24in-x-100ft


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Need custom CPO printed from somewhere (Read 11462 times)

excaliburlives

Need custom CPO printed from somewhere

SNAAKE

Re: Need custom CPO printed from somewhere

excaliburlives

Re: Need custom CPO printed from somewhere

SNAAKE

Re: Need custom CPO printed from somewhere