Author Topic: IPAC-4 Not Registering (Most) Key Presses from Player 1 and 3 (Read 1153 times)

uiucphoenix · « **on:** December 27, 2022, 12:53:16 am »

Hey all, I'm having some trouble with my new 4-Player Control Panel Build on Windows 11. I've wired everything up and the joystick and buttons are not registering for Player 1 and 3. The Coin and Start work, but everything else is not picking up when the switches are pressed. Player 2 and 4 also work with no issues. Has anyone experienced this before?

uiucphoenix · « **Reply #1 on:** December 27, 2022, 11:04:01 am »

I got a quick email response from Andy at Ultimarc and tested the switches by connecting a wire to the ground and then touching it to the screw for each control. They were working so I re-ran all of my ground daisy chains and the joystick and buttons started working. My user error, of course!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: IPAC-4 Not Registering (Most) Key Presses from Player 1 and 3 (Read 1153 times)

uiucphoenix

IPAC-4 Not Registering (Most) Key Presses from Player 1 and 3

uiucphoenix

Re: IPAC-4 Not Registering (Most) Key Presses from Player 1 and 3