Author Topic: New Seimitsu 'Black Screw Ring' Diameter (Read 1181 times)

grotesque · « **on:** September 21, 2022, 11:02:45 am »

Hello everyone,

I am in the middle of planning my first cabinet build and have referenced the Taito Vewlix layout on Slagcoin as well as the general Panel Mounting and Layering Guide for Seimitsu button dimensions.

Does anyone have experience with the 'new' (I'm not actually sure how new they are) Seimitsu 30mm buttons with the slimmer/taller black screw ring that Focus Attack sells? Are these screw rings < 35mm in diameter and so smaller than the older white/clear rings that were used on Seimitsu buttons? I just am trying to confirm that the Taito Vewlix layout from Slagcoin will work with these 30mm Seimitsu screw-in buttons.

If not, is it safer to just change to the 36.5mm Taito Vewlix Layout or the 36.5mm Generic Vewlix Layout?

Thanks,
John


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: New Seimitsu 'Black Screw Ring' Diameter (Read 1181 times)

grotesque

New Seimitsu 'Black Screw Ring' Diameter