Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Ipac 4 player 2 switch left dead  (Read 1143 times)

0 Members and 1 Guest are viewing this topic.

turtlerhy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:March 25, 2021, 12:51:36 am
  • I want to build my own arcade controls!
Ipac 4 player 2 switch left dead
« on: March 11, 2021, 03:31:10 pm »
Hey guys!

So this is the 2nd ipac 4 that has crapped out on me, the first one... totally my fault, the USB slot on the ipac broke due to me not having enough slack and it eventually broke the insides of the USB totally my fault!

However, this 2nd one that just came through, I just spent all the time rewiring the damn thing, and everything is firing except for one! player 2 switch- left... nothing fires when I put the wire into this slot, I tried multiple different buttons and I know that the button is working because if I put it into switch 7 or swap the left and right, it fires, so no break in the daisy chain.

I checked with Andy he suggested making sure that winipac still had it registered and it does, but cannot get the thing to fire. I can manipulate it by putting it on to switch 7 but, i was really hoping to put this in multimode to play some KI.

is there anything that I can do? or do I need to send this one back too?

turtlerhy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:March 25, 2021, 12:51:36 am
  • I want to build my own arcade controls!
Re: Ipac 4 player 2 switch left dead
« Reply #1 on: March 25, 2021, 12:50:11 am »
IPac was broken, had to send it back