Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: U-Track Hookup Help Please  (Read 1065 times)

0 Members and 1 Guest are viewing this topic.

Richardgregory

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 360
  • Last login:November 17, 2021, 01:15:10 pm
  • I want to build my own arcade controls!
U-Track Hookup Help Please
« on: February 23, 2021, 03:07:23 pm »
I believe I might have a defective U-Track or the USB board that came with it, and I'd like to determine which is defective by hooking up the U-Track directly to the Ipac2, but I don't know which wires goes to where.  Can anyone help with this please?

Right now, the Trackball is only moving in the X Axis, and so there's no response from Y Axis in windows.

Thanks
« Last Edit: February 23, 2021, 03:36:03 pm by Richardgregory »

Richardgregory

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 360
  • Last login:November 17, 2021, 01:15:10 pm
  • I want to build my own arcade controls!
Re: U-Track Hookup Help Please
« Reply #1 on: February 23, 2021, 03:39:21 pm »
Ok, the trackball just started working fine...I suspect that the ball needed to be rolled around a few times for whatever reason - perhaps the Y axis roller was still stiff, and moving the ball around "primed" it.

Anyhow, all seems fine now.

Cheers