Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rowe R91 with error codes 39 and 32.  (Read 185 times)

0 Members and 1 Guest are viewing this topic.

Brimc

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:January 17, 2021, 10:03:40 pm
Rowe R91 with error codes 39 and 32.
« on: January 15, 2021, 03:05:42 pm »
I have a rowe R91 which is displaying error codes 30 and 32. I have removed, cleaned, and tested the optical switch as well as cleaning the gear that the optical switch follows. Optical switch has tested good and also lights the home and pulses the index leds. Optical switch was also adjusted to home as per the manual.  I have cleared the errors and they immediately come back and the carousel continuously rotates. All components on the mech control board have been checked and are within 10% and transistors are not showing shorts. All connector headers have been reflowed as well. Any ideas or advice what I could have missed.