Hi
I would like to share my build project with this group as i have spent so many hours /days/weeks viewing the forums and learnt such a huge amount from its members. I first discovered MAME about 15 years ago and enjoyed being reminded of my youth - donkey kong, track and field, Raiden, street fighter. Life got in the way until I began thinking again about building my own cabinet for retro gaming.
I have limited computer / electrical knowledge and didn't own a windows PC until 4 months ago, however I am keen to learn and know where to find help.
So about 9 months ago I began planning the build and buying some of the bits that I (thought) I would need.
I knew i would only be satisfied with the project if it had a 15 kHz CRT monitor so I figured I would try and buy as much glass space as possible and waited patiently for a 29inch sony crt to appear on ebay. I wanted a 29inch because i wanted to play vertical games and thought that would give the best fit. I bought a sony trinitron 29 inch 4:3 (KVA2942U) which is a "Super" trinitron - still not really sure what that means - i couldn't find very much information about this tv on the internet but now i'm fairly sure it is not a 100Hz model and thats about it. These units are very heavy!! This sat in my garage until i found a PC.
The PC i chose form ebay was a win10/ i5 / 256ssd / 1TB hd / and it came with an nvidia card which i swapped for and AMD R9 380 graphics card. I now know think this level card was unnecessary - i thought it would help with Bigbox front end use - but appreciate now that this is probably not the case. If i could choose again i would have gone for a faster processor instead of a better graphics card. I then began trying to connect the PC to my CRT. This link was crucial to my basic understanding of how and why and I read this many times -
https://www.aussiearcade.com/forum/arcade/m-a-m-e-emulation-projects-and-discussion/89704-a-guide-to-connecting-your-windows-pc-to-an-sd-crt-tv-pvm-or-arcade-monitorI found an old SCART cable and created a VGA (screw terminals) socket to SCART . After a bit more research I found that connecting one of the SCART pins to a 12v supply (from an unused PC molex connector) will make the tv power up on the correct AV channel without the need to reach for the remote. My old TV seemed to work fairly well, there is some geometry distortion - but i only noticed this when looking at a test pattern. The one thing that did cause me concern was the amount of flickering present especially when looking at large areas of white against dark colours. This however is not a problem when viewing 240p games and only really problematic when viewing webpages on 480x680. It may well be that all crt's suffer from this and i just hadn't seen a crt picture for so long i had forgotten. Setting up the CRT with CRT Emudriver was fairly easy and some of my problems were down to me not reading the guides properly- this one was also very helpful -
https://cdcruze.com/2019/03/retroarch-and-crt-emudriver-setup-guide/I then began looking into the software. I choose Launch box and payed for a year's worth of Big Box. I wasn't that hugely impressed with launch box form a visual point of view, however with BigBox applied the system it looks great and functions really well! I wanted to be able to play some early console games NES/SNES so spent some time with Retroarch (here I lost many weeks!!!) and it was the most frustrating step of the project so far. I found retroarch kept messing up with the TV resolutions after the games had finished - I still feel I've a long way to go and perhaps stand alone emulators without retroarch are the way to go.
I finally got the the software setup at least part of the way there and began wanting to move on to the next step. I decided that i would decase the CRT - it somehow felt a much more professional way to do the project rather than simply placing the tv in the cabinet with its plastic bezel.
The TV was filthy inside with 25 years buildup of dirt and dust. I took lots and lots of photographs before i started to disassemble it prior to cleaning and even then there were points when i thought i wouldn't be able to put it back together again. I had read that you can place the circuit boards in a dishwasher - i wasn't brave enough and simply washed them in warm water under the tap. I left them in an airing cupboard for a week or so before connecting them back up. The worst part was removing the anode cap from the tube I thought i had damaged the glass despite being very careful.
With the tube face down on a table i built a wooden frame around it - the tv i was using had four very sturdy brackets on each corner so it was fairly straight forward. I then made a tray for the chassis and strengthened the construct with two metal struts.
Then came the moment of truth - i reattached the anode cap, applied some new silicone grease and ------- i couldn't believe it powered up and i was able to view the tv menu - result!!!!