Author Topic: Shift Mode (key) IPAC stopped working (Read 985 times)

Arcade1980 · « **on:** September 01, 2020, 01:48:38 pm »

I changed out some buttons on my control panel, and now the IPAC Shift mode is no longer working. In the WinPAC software, all looks normal. Ie. Player 1 Start button is assigned as the "Shift" mode option. I can't see how switching out some buttons breaks things since I did not make any changes to the software/MAME. I didn't even remove any of the wiring....

Anyhow..

While pressing the Player 1 start and holding it down, and moving the joystick left is suppose to be equivalent to the ENTER key, but nothing happens.

None of the other Ipac SHIFT key button combinations aren't doing anything. I did the individual button test and all is fine and responding...I don't see any stuck keys.

Thoughts anyone?
Thanks

Arcade1980 · « **Reply #1 on:** September 01, 2020, 03:15:00 pm »

Nevermind...figured it out. Connection to a switch was in the NC


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Shift Mode (key) IPAC stopped working (Read 985 times)

Arcade1980

Shift Mode (key) IPAC stopped working

Arcade1980

Re: Shift Mode (key) IPAC stopped working