Good afternoon! I'm working on my panel layout and wanted to confirm the hole size for Goldleaf buttons. The wiki says 1 5/32 but I've found other places that mention that they're 1 1/8. Which bit size should I use?
Leaf buttons =/= Ultimarc Goldleaf buttons.
Leaf buttons
Goldleaf buttons
Use a 1-1/8" bit for the Goldleafs.
- 1-1/8" = 28.575mm
- In a pinch, you
might get away with using a 30mm bit, but the extra wiggle room makes it a bit harder to keep the spacing equal.
Scott