Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Noob trying to get steering wheel to work (PC, OutRun 2006)  (Read 3501 times)

0 Members and 1 Guest are viewing this topic.

Shipman

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:August 23, 2020, 01:51:32 pm
Hi,

I've got Windows Vista 32-bit.  OutRun 2006.  Logitech Wingman Formula Force GP (USB).

I've installed Logitech Profiler and calibrated. 
The problem is I can't calibrate the accelerator or brake pedal under Configuration in OutRun 2006. Having pressed the pedal down, pressing Enter or ESC doesn't seem to do anything:


MrThunderwing

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1090
  • Last login:Today at 11:52:06 am
  • As I pass, do I give you the ass or the crotch?
Re: Noob trying to get steering wheel to work (PC, OutRun 2006)
« Reply #1 on: June 11, 2020, 02:59:35 pm »
If I recall correctly, you need to press one of the face buttons on your wheel to get it to register that you're trying to calibrate a gas or brake axis. On my DFGT I think it was the X button. You'll know it's worked, because you'll get a confirmation noise and the axis should look different on screen and prompt you to press it down or something. You then need to follow the instructions about pressing that pedal down and pressing whatever the confirmation button was to register it.

Shipman

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:August 23, 2020, 01:51:32 pm
Re: Noob trying to get steering wheel to work (PC, OutRun 2006)
« Reply #2 on: June 15, 2020, 05:53:45 pm »
Thank you, I've worked it out.  It's not that intuitive at all.
You have to tap the relevant pedal to tell it which one you want to assign, then wait about four seconds, then it asks you to press the pedal to the max, then release it etc.