Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rowe RI-1 Noise When Engaged  (Read 1911 times)

0 Members and 1 Guest are viewing this topic.

waryan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:June 17, 2020, 12:00:39 pm
  • I want to build my own arcade controls!
Rowe RI-1 Noise When Engaged
« on: June 10, 2020, 03:37:20 pm »
I have an RI-1 that I have functioning pretty well, except for one issue. There is a lot of noise when the player starts to engage. I can lift the tonearm up and the noise continues. It is a popping and loud hum. The noise will go up and down with the volume control. My gut tells me this is a grounding issue based on my experience with other hifi systems.

I have a can of deoxit if that can help.

I do believe that monkeying with the pin connection that goes to the RCA plugs makes a difference. Any help is much appreciated. Thank you.

waryan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:June 17, 2020, 12:00:39 pm
  • I want to build my own arcade controls!
Re: Rowe RI-1 Noise When Engaged
« Reply #1 on: June 15, 2020, 02:51:50 pm »
I ended up spraying deoxit D5 on just about every connection I could find. Problem solved.