Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Building a MAME cab for the first time. Is this a good choice for a CRT?  (Read 1434 times)

0 Members and 1 Guest are viewing this topic.

paulwgraber

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 29
  • Last login:November 11, 2020, 09:31:09 pm
  • I want to build my own arcade controls!
Building a MAME cab for the first time. Is this a good choice for a CRT?
« on: March 26, 2020, 08:45:20 pm »
Wells Gardner WGM2792. Getting it for $50 in great shape, no burn in and includes bevel.
https://www.amusementsplus.com/index.php?pr=Category&cat=45&sub=101&id=532

Any thoughts on this model? Will it work for a MAME cab?

Thx
Logged

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19960
  • Last login:July 27, 2025, 08:34:04 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Building a MAME cab for the first time. Is this a good choice for a CRT?
« Reply #1 on: March 26, 2020, 10:01:21 pm »
Quote from: paulwgraber on March 26, 2020, 08:45:20 pm
Wells Gardner WGM2792. Getting it for $50 in great shape, no burn in and includes bevel.
https://www.amusementsplus.com/index.php?pr=Category&cat=45&sub=101&id=532

Any thoughts on this model? Will it work for a MAME cab?

Thx
Do it. That’s a good deal!
Logged
***Build what you dig, bro. Build what you dig.***

fuchi_jeg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 69
  • Last login:June 23, 2023, 11:11:04 am
  • I want to build my own arcade controls!
Re: Building a MAME cab for the first time. Is this a good choice for a CRT?
« Reply #2 on: March 27, 2020, 08:30:47 am »
Wgm2792 is a d9200 crt. The product you linked to is a wgm2794, a d9400, which is the newer revision of the 9200. The 9200 was known to have a lot of problems. Just a little fyi. Do some research on common problems and fixes if it is truly a d9200.
Logged

paulwgraber

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 29
  • Last login:November 11, 2020, 09:31:09 pm
  • I want to build my own arcade controls!
Re: Building a MAME cab for the first time. Is this a good choice for a CRT?
« Reply #3 on: March 27, 2020, 04:37:20 pm »
Yep actually its a D9200
Logged

fuchi_jeg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 69
  • Last login:June 23, 2023, 11:11:04 am
  • I want to build my own arcade controls!
Re: Building a MAME cab for the first time. Is this a good choice for a CRT?
« Reply #4 on: March 27, 2020, 05:07:43 pm »
http://forum.arcadecontrols.com/index.php/topic,64564.0.html
Here is the thread where the wg digital tri syncs are discussed.
Logged
Pages: [1]
  
Go Up
« previous next »