Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Hantarex 9110 very sensitive vertical hold. (SOLVED)  (Read 665 times)

0 Members and 1 Guest are viewing this topic.

perjmolsen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 417
  • Last login:April 03, 2020, 03:17:04 am
  • I want to learn, and try.. I NEWER give up :)
    • My gameroom
Hantarex 9110 very sensitive vertical hold. (SOLVED)
« on: September 30, 2019, 07:10:09 am »
Hi

I need your help

I have a MTC 9110 who has a very sensitive vertical hold.

A small video


I am able to get the picture to lock vertical, but it stays only for a short time, and if i turn the  power off the picture is rolling or has shifted a bit so that it is not longer in center
Trying to solve this issue, i have done:

1. changed nearly all the electrolytic caps, except C24 and C205 (I did not have these in my parts boxes, but the old one tested OK)
2. changed the vertical freq pot (no diffrence)
3. tried to put in a 5k resistor between gnd and vertical sync (no difference at all)


When the picture is not locked vertical i got red lines across the screen, but they disapeer when i get the picture to hold, and become stable.
What can cause my picture to be so sensitive to the vertical hold?

Can it be the IC1 TDA1675A that causes the issue?

The manual for the chassis is found here: http://www.arcade-museum.com/manuals-monitors/Hantarex%20MTC9110%2025in%20and%2028in%20Color%20Monitor.pdf

« Last Edit: October 03, 2019, 08:46:18 am by perjmolsen »

perjmolsen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 417
  • Last login:April 03, 2020, 03:17:04 am
  • I want to learn, and try.. I NEWER give up :)
    • My gameroom
Re: Hantarex 9110 very sensitive vertical hold.
« Reply #1 on: September 30, 2019, 09:04:49 am »
Hi

Just an update - found an TDA1675A in my parts, and where able to turn off and on the game without the picture rolling..  :applaud:
But it is still very very sensitive... so I will keep you updated  :D
« Last Edit: September 30, 2019, 09:22:12 am by perjmolsen »

perjmolsen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 417
  • Last login:April 03, 2020, 03:17:04 am
  • I want to learn, and try.. I NEWER give up :)
    • My gameroom
Re: Hantarex 9110 very sensitive vertical hold.
« Reply #2 on: October 03, 2019, 08:45:08 am »
Hi

Just an update

The other day the screen began to roll again  :banghead:

The all mighty chassis repair guy ->grantspain  :notworthy: told me that only the h-sync needs to be connected.
So i checked my connections.. and also the v-sync where connected...
So removed the v-sync and now the vertical adjustment pot is not sensitive any more and it holds the sync  :cheers:
« Last Edit: October 03, 2019, 08:47:11 am by perjmolsen »