Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: IPAC Ultimate I/O NOT detecting keys  (Read 515 times)

0 Members and 1 Guest are viewing this topic.

shitoken

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:March 26, 2020, 02:07:11 am
  • I want to build my own arcade controls!
IPAC Ultimate I/O NOT detecting keys
« on: July 17, 2019, 11:27:45 pm »
Hi Friends I need your advise

My IPAC Ultimate I/O was bought in 2016-2017 cant remember exactly. I am using Win7 Ultimate SP1
I have noticed new firmware been released so I installed WinIPAC V2 and connected my board , upgraded to 1.49 i/o nogp firmware
Now the problem is green light does turn on which mean board is fine and all my RGB buttons will lit up as usually when startup computer, but it wont off till I pull the wire. Normally it will off when I start using the computer. Also the buttons stopped working I have tried typing on notepad. Dont understand what went wrong. Year back I did upgrade firmware to 1.32 without this problem all was smooth.

I can see ultimarc in device manager keyboard and I have also tried uninstalling the driver but problem still exist. All my wirings are correct and it was working on Hyperspin Just day ago. What should I do now to test further ?

My board is very less been used , because I don't play much .

Could it be winipac v2 wiped all the settings? How to reset to factory default?
« Last Edit: July 19, 2019, 03:32:44 am by shitoken »

shitoken

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:March 26, 2020, 02:07:11 am
  • I want to build my own arcade controls!
Re: IPAC Ultimate I/O NOT detecting keys
« Reply #1 on: July 19, 2019, 03:35:00 am »
Updates

I have checked all my default Mame keys have been wiped out after updating the firmware. Now the board have no keys been set.
How can I restore back to default Mame Keys?