Author Topic: How would you repair this top? (Read 4891 times)

pippin65 · « **on:** May 19, 2019, 03:56:33 pm »

How would you repair this top?

pippin65 · « **Reply #1 on:** May 19, 2019, 10:42:12 pm »

I did this... sprayed with adhesive. Cleaned up the edges.

Titchgamer · « **Reply #2 on:** May 20, 2019, 03:00:40 am »

Think I would replace it at that point.

pippin65 · « **Reply #3 on:** May 21, 2019, 09:38:57 pm »

I cut back the untamed beastie with my utility knife. And covered it with arcade tape. Secured with Williams staples. And voila! Perfection.

Vigo · « **Reply #4 on:** May 22, 2019, 08:37:52 am »

The meticulous dedication you put into your craft for this restoration work is unparalleled.

_Iz- · « **Reply #5 on:** May 28, 2019, 12:56:46 am »

behrmr · « **Reply #6 on:** May 28, 2019, 11:18:08 am »

I cut back the untamed beastie with my utility knife. And covered it with arcade tape. Secured with Williams staples. And voila! Perfection.

Meh. Didn't use NOS Arcade Tape. It's clearly a cheap knockoff.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news