Author Topic: IPAC Problems.. HELP! (Read 794 times)

Magnet_Eye · « **on:** February 12, 2004, 03:48:16 am »

Hey, I have an old IPAC...had it for a few years. Anyway, suddenly the shift functions stopped working! And for a few minutes the UP key wasn't working right, I restarted and unplugged it and re-plugged it in and that was working again (UP) but the shift functions are all gone.. WTF is going on? is this thing dying? Any ideas?

I'm running Win XP, USB IPAC

Thanks!

Magnet Eye

NoOne=NBA= · « **Reply #1 on:** February 12, 2004, 08:29:29 am »

My first guess would be a stuck button.
I had a wire end that I missed clipping when I installed mine; and it worked great for about a month before that wire end got shorted to the NC contact on the switch.
My shift functions quit working when that happened.

If you are having problems with your UP function as well, check that one first.
It is quite likely the culprit.

Sephroth57 · « **Reply #2 on:** February 12, 2004, 08:31:45 am »

yeah it sounds like NoOne nailed that one. check out that Up for a loose wire


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: IPAC Problems.. HELP! (Read 794 times)

Magnet_Eye

IPAC Problems.. HELP!

NoOne=NBA=

Re:IPAC Problems.. HELP!

Sephroth57

Re:IPAC Problems.. HELP!