Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Seeburg LS1  (Read 563 times)

0 Members and 1 Guest are viewing this topic.

Mike In Jax

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 16, 2019, 10:34:02 pm
  • I want to build my own arcade controls!
Seeburg LS1
« on: January 26, 2019, 10:00:46 am »
Hello..  I'm Mike in Jacksonville Fl.
Crediting Question..  The coin mech assy in my LS1 has never been in this Jukebox since I purchased it a year ago.
I wish to install a momentary push button switch to establish a 2 credits in the stepper.

At present time I am using a momentary push button switch (which must be held down) while record selection is being selected. This switch is wired to pins 6 & 7 on
on the P4103 plug.

I DONOT want the box in on steady "free play", which will cause the solinoids to stay constantly energized.
CAN ANYONE HELP ??   Thanks a million
« Last Edit: January 27, 2019, 09:40:28 am by Mike In Jax »