Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: JVL Conquest Software Request - itouch4  (Read 679 times)

0 Members and 1 Guest are viewing this topic.

JoshCRT

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:February 26, 2019, 04:12:06 am
  • CRT Guru
JVL Conquest Software Request - itouch4
« on: January 21, 2019, 08:50:16 pm »
I purchased an old JVL Conquest that was reporting disc read errors. The CD drive wasn't spinning, I swapped the drive but the machine still won't boot. It looks like the original operator was using a burned disc with the "MY_DISC" as the ID label - so I assume they didn't create a proper image when doing so.

Does anyone have a disc image of the iTouch 4 software? Thanks!










orizzle

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 156
  • Last login:October 12, 2019, 11:12:32 pm
  • I want to build my own arcade controls!
Re: JVL Conquest Software Request - itouch4
« Reply #1 on: January 23, 2019, 07:25:04 am »
Is the cd spinning after replacing the drive? Getting power?

Lowest I can find is v5. If you're interested, I can see if I have a key to go along with it

« Last Edit: January 23, 2019, 07:36:24 am by orizzle »

JoshCRT

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:February 26, 2019, 04:12:06 am
  • CRT Guru
Re: JVL Conquest Software Request - itouch4
« Reply #2 on: January 29, 2019, 07:23:38 pm »
The replacement drive is indeed working, I tested it with an IDE to USB adapter and was able to read the disc fine on another PC.

I can hear it spin up and start being read, it shows the disc ID at the bottom of the screen (MY_DISC) so I know it sees the disc. Before replacing the drive it never saw the disc ID.