Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Coin Door Wiring Sparks  (Read 915 times)

0 Members and 1 Guest are viewing this topic.

Csdoplr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:December 03, 2018, 10:31:13 am
  • I want to build my own arcade controls!
Coin Door Wiring Sparks
« on: December 03, 2018, 09:50:05 am »
Hello all,
New to pinball restoration and I have a issue. I have a Bally EM Bow and Arrow Machine. The coin door I recently rewired. However on the second coin micro switch that I reconnected now sparks and burns when I hit the credit button on the game and smokes everywhere. The micro switch that I attached thr wire too had a bit of a broken connector but I am still able to solder it and get a connection. I believe it is starting to make the other two wires connected to the three wire micro switch burn and smoke as well. Does anyone know why this would be? I am not sure if its becasue the micro switch has the connector missing or if it is something else.
Thanks

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3453
  • Last login:Today at 03:09:10 am
  • I have a gaming addiction.....
Re: Coin Door Wiring Sparks
« Reply #1 on: December 04, 2018, 03:41:30 am »
If the connection is broken or cracked it will increase resistance, pull more current and get hot.