Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


Author Topic: D9200 Daed?  (Read 827 times)

0 Members and 1 Guest are viewing this topic.


  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 478
  • Last login:May 08, 2020, 01:32:28 pm
D9200 Daed?
« on: October 07, 2018, 03:22:29 pm »
Hi Guys, looking for some help!
I am backlogged in repair and not so experienced on the D9200.

Here is the issue- Dead more or less on power up 1Click followed by a series of rapid clicks (almost a buzz).

The Hot was shorted and I have replaced it, still fine.

If I substitute the Hot for a 60 watt bulb to the collector - it does not light.

This would indicate a power supply issue, regulator seems fine and no bulged caps. I tackle it again tomorrow, but if any one has any insight and I can save some time that would be great!

Always happy to help.., for the best in displays
Rick Nieman
1023 Rife Rd Cambridge, Ontario Canada N1R5S3

princess prin prin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 215
  • Last login:Today at 09:05:02 am
  • intrinsically safe
Re: D9200 Daed?
« Reply #1 on: October 09, 2018, 05:21:11 am »
Before pointing finger at the PSU, move the lamp to an earlier stage of the B+ path. Lift the leg of R854 farthest from the PSU and try there.