Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Gingerballs 2.0 Advanced Prototype, art is now installed.  (Read 5821 times)

0 Members and 1 Guest are viewing this topic.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Gingerballs 2.0 Advanced Prototype, art is now installed.
« on: August 26, 2018, 04:23:36 pm »
The other ball drops ;)

This is just a prototype of the upcoming kit from Haruman. I'm putting it together to see what needs tweaking.

Started by gluing the base together:


Put the head together too (and test fitted the Pin2DMD):


some base paint:



Mounted the head frame cross beam:


Some more paint, and test mounted the exhaust fan:


quick Carbon fiber wrap on the front (I'll trim it off the sides after I whip up some artsies)




Just trying to figure out the internal layout:




After I figure out where everything is going to go, I'll drill the holes for the power supply intake, speakers, etc
« Last Edit: January 15, 2019, 09:45:12 pm by Malenko »
If you are helping someone and expecting something in return, you are doing business not kindness.

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6184
  • Last login:Yesterday at 09:58:02 pm
    • Bella's Arcade
Re: Gingerballs 2.0 Advanced Prototype
« Reply #1 on: August 26, 2018, 04:54:58 pm »
Looks great so far.  Why is the back so tall?  I thought people used one monitor for the back and the DMD (top 1/2 for the back screen and bottom 1/2 for a fake DMD).  I haven't been following pin builds in a while though...

Laythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 445
  • Last login:Yesterday at 11:03:52 pm
  • "-smurfing- delivers." - Yots
    • forum.arcadecontrols.com/index.php/topic,149109.0.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #2 on: August 26, 2018, 05:09:22 pm »
Nice!

Given the kits are cut on a machine, would a couple tabs of finger joint for the 90 corners of the lower box be worth doing?

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #3 on: August 26, 2018, 05:16:26 pm »
Looks great so far.  Why is the back so tall?  I thought people used one monitor for the back and the DMD (top 1/2 for the back screen and bottom 1/2 for a fake DMD).  I haven't been following pin builds in a while though...
Modular kit, you can pick the head you want and the body you want (based on screen sizes). Ginger 1.0 had the DMD's played over top of the backglass image on the same screen.
This head is for a "real" DMD , it goes better with a bigger base. Ideally they'll be a third head with speakers too, but nothing is set in stone.
I didnt want to buy another monitor for a prototype build, so its got a tall DMD head :)

Nice!
Given the kits are cut on a machine, would a couple tabs of finger joint for the 90 corners of the lower box be worth doing?
That's a Haruman question. I'll let him answer.
If you are helping someone and expecting something in return, you are doing business not kindness.

Laythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 445
  • Last login:Yesterday at 11:03:52 pm
  • "-smurfing- delivers." - Yots
    • forum.arcadecontrols.com/index.php/topic,149109.0.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #4 on: August 26, 2018, 05:43:20 pm »
Sure - apologies, I don't mean to sound like I'm trying to tell Haruman how to do his job or anything.  I'm sure he will know the pros and cons.  I thought it might make assembly easier if they had a few tabs, and that the prototype phase might be the time to say so.  If it's already been considered and is hard to mass produce a consistent fit, I totally understand.

That's such a charming form factor.  Gingerballs was awesome, and I'm glad more people will have a chance to try something like it.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18819
  • Last login:Today at 03:15:08 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #5 on: August 26, 2018, 05:58:00 pm »
I would think the CNC couldn’t cut the finger joints square enough.
***Build what you dig, bro. Build what you dig.***

Ian

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1053
  • Last login:April 25, 2019, 11:53:10 pm
  • "A day without Laughter is a day wasted"
Re: Gingerballs 2.0 Advanced Prototype
« Reply #6 on: August 26, 2018, 08:39:07 pm »
Watching this with much anticipation.
Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3078
  • Last login:Today at 04:39:31 am
  • Buy a Multimeter
Re: Gingerballs 2.0 Advanced Prototype
« Reply #7 on: August 26, 2018, 09:42:10 pm »
I would think the CNC couldn’t cut the finger joints square enough.
If you can mount the board perpendicular to the x axis instead of flat on it you can cut proper finger joints. Most CNC machines don't allow for this because it cuts down on the total work area.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18819
  • Last login:Today at 03:15:08 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #8 on: August 26, 2018, 10:07:52 pm »
I would think the CNC couldn’t cut the finger joints square enough.
If you can mount the board perpendicular to the x axis instead of flat on it you can cut proper finger joints. Most CNC machines don't allow for this because it cuts down on the total work area.

Hmmm... that makes sense. You’d need a pretty long/deep Z axis though.
***Build what you dig, bro. Build what you dig.***

Laythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 445
  • Last login:Yesterday at 11:03:52 pm
  • "-smurfing- delivers." - Yots
    • forum.arcadecontrols.com/index.php/topic,149109.0.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #9 on: August 26, 2018, 10:09:59 pm »
I think that you can also do fingers if you're using a waterjet or laser.  (I didn't know if he was CNCing the kits that way, or on a mill / router.)

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 8474
  • Last login:Today at 01:37:19 am
  • Obey.
    • The Chris Burke Band
Re: Gingerballs 2.0 Advanced Prototype
« Reply #10 on: August 26, 2018, 10:15:59 pm »
Hate it.

 
This forum needs more threads about Arcade 1Up cabinets.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #11 on: August 26, 2018, 10:21:25 pm »
Hate it.

I hate your face.   What do you hate about it?  The head height cant be shaved much and keep the DMD :(
If you are helping someone and expecting something in return, you are doing business not kindness.

jdbailey1206

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2401
  • Last login:Yesterday at 08:30:48 am
  • No. It's your top score on Pole Position.
Re: Gingerballs 2.0 Advanced Prototype
« Reply #12 on: August 27, 2018, 07:46:48 am »




I hate that you have your workstation organized and I don't.   ;D
« Last Edit: August 27, 2018, 07:53:07 am by jdbailey1206 »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #13 on: August 27, 2018, 08:44:47 am »
its only organized because I had to get it that way to start building the bathroom in the background :p
If you are helping someone and expecting something in return, you are doing business not kindness.

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 8474
  • Last login:Today at 01:37:19 am
  • Obey.
    • The Chris Burke Band
Re: Gingerballs 2.0 Advanced Prototype
« Reply #14 on: August 27, 2018, 02:34:42 pm »
I don't get the point of these virtual machines, and if you're going to build one, why would you bother with something that isn't full size or nearly so?

Are you planning on playing 'real' games or stuff specifically developed for the virtual pinball platform?  I've yet to play a video pinball that didn't bore me by the second ball besides Windows Space Cadet 3D Pinball.  Even those hybrid Multimorphic machines are complete garbage.



This forum needs more threads about Arcade 1Up cabinets.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #15 on: August 27, 2018, 02:40:58 pm »
I enjoy emulated pinball, I know its not the same but its still fun.  I play both "virtualized real games" and purpose built software games (Pinball FX)

I don't get the point of these virtual machines, and if you're going to build one, why would you bother with something that isn't full size or nearly so?
I can keep this upstairs in my office , if I want to play the real thing I'll go down to the basement and have at it.
« Last Edit: August 27, 2018, 03:16:01 pm by Malenko »
If you are helping someone and expecting something in return, you are doing business not kindness.

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:June 20, 2019, 07:23:11 pm
Re: Gingerballs 2.0 Advanced Prototype
« Reply #16 on: August 27, 2018, 03:03:18 pm »
That's what it gets down to doesn't it?  You either enjoy playing virtual pinball and pinball based software games OR YOU DON'T.  Trying to compare a real pinball machine with a Vpin is a bit pointless they’re obviously not the same experience.  I like real pinball but I also like pinball software games.  Every time I play my favourites on a PC I think how much more fun they'd be with better controls.  That's the point of these.

I was quite inspired by your first one of these Malenko - mini Vpins are good if you have less space for a full size table, real or virtual.

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3078
  • Last login:Today at 04:39:31 am
  • Buy a Multimeter
Re: Gingerballs 2.0 Advanced Prototype
« Reply #17 on: August 27, 2018, 03:10:41 pm »
I am not a fan of vpins myself. My dad loves playing pinball on his cell phone. One of these would be great for him. He would love it. He moved to Chicago with my mom and no money from North Dakota. He took a job driving a cab, and he worked at Chicago Coin for awhile.

Vigo

  • the Scourage of Carpathia
  • Trade Count: (+24)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5994
  • Last login:Today at 04:20:57 am
Re: Gingerballs 2.0 Advanced Prototype
« Reply #18 on: August 27, 2018, 06:23:30 pm »
I played on the original Ginger balls. Besides the sharp edge that needed a fixin, it was probably one of my favorite vpin experiences. I personally don't ever want to next to a 50" monitor flopped horizontally in my living room. It is just too much screen to be huddled against. Gingerballs 1.0 was just easy to follow, had snappy controls and really captured all I wanted out of a fake pinball experience.

jdbailey1206

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2401
  • Last login:Yesterday at 08:30:48 am
  • No. It's your top score on Pole Position.
Re: Gingerballs 2.0 Advanced Prototype
« Reply #19 on: August 28, 2018, 10:21:57 am »
Two things have to be formulated from this discussion:
  • PBJ needs to make a Virtual Windows Space Cadet Pin
  • "***Build what you dig, bro. Build what you dig.***"

opt2not

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5336
  • Last login:Today at 01:05:29 am
Re: Gingerballs 2.0 Advanced Prototype
« Reply #20 on: August 28, 2018, 02:01:16 pm »
Two things have to be formulated from this discussion:
  • PBJ needs to make a Virtual Windows Space Cadet Pin
  • "***Build what you dig, bro. Build what you dig.***"
  • Vigo enjoys playing with Ginger Balls

FTFY

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • Last login:Yesterday at 10:01:48 pm
  • Bitches love Centipede
Re: Gingerballs 2.0 Advanced Prototype
« Reply #21 on: August 28, 2018, 02:53:34 pm »
I don't get the point of these virtual machines, and if you're going to build one, why would you bother with something that isn't full size or nearly so?

Price. For what a full size VP would cost, you could buy a few real pins. Virtual pinball blows overall, but a mini VP cab is the best way to play. I played a full size PBFX at Zapcon... ---fudgesicle--- being that close to a screen that big. VP is a novelty, just like MAME.
%Bartop

nexusmtz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 347
  • Last login:Yesterday at 11:12:21 pm
Re: Gingerballs 2.0 Advanced Prototype
« Reply #22 on: August 29, 2018, 02:30:45 am »
At that high price, you'd think that those PBFX machines would have had decent frame rates. At least when you build it yourself, full or mini, you have control over that.

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1653
  • Last login:Yesterday at 03:07:33 pm
  • Web Developer.
Re: Gingerballs 2.0 Advanced Prototype
« Reply #23 on: August 29, 2018, 08:18:06 pm »
Cool.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #24 on: September 09, 2018, 06:13:46 pm »
Did some mathing and geometrifying  to figure out where the power supply inlet hole was going to go:


used a hole saw bit:


fits like a glove!


figured out where to put the bracing batons in:


then clamped them all down


To note, another set of larger batons go overtop, locking the PS in place and acting as a platform for the FFB solenoids.
This is  the rough footprint Im going to be using. I will be mounting the FFB control board and the IPAC and doing the wiring much better than GB 1.0



Pulled everything out and prepped for paint, getting the side super smooth



and the first of many many many coats is on:

If you are helping someone and expecting something in return, you are doing business not kindness.

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:June 20, 2019, 07:23:11 pm
Re: Gingerballs 2.0 Advanced Prototype
« Reply #25 on: September 09, 2018, 08:47:55 pm »
Yay ! This is going to be my go to project when I build one of these.  Looking good so far. Subscribed.  :cheers:

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #26 on: September 10, 2018, 08:37:56 pm »
Now that the paint is dry, I decided to fancy pants it up a bit. Added underbody LEDs (white only, not RGB)





There will be legs on the bottom to elevate it a bit and let the light glow bright underneath. I had a TON of extra from real pin projects so it was a free upgrade :)

The prototype kit only has a slot for 1/4" thick wood for the bottom. While this maximizes inside space for guts it leaves nothing to screw into. Production kits will likely have 1/2" for the base, or 2 pieces of 1/4" , one for putting the kit together and an additional 1/4" piece to sit inside the bottom.

I just cut down 1/2" batons screwed the mobo into them, and then glues them down into place.



Next I'll be doing wire management and trying to keep everything tidy before I add the top level batons that the FFB solenoids will screw into. Current plan is to bottom mount the solenoids and have the PF monitor sit on top of it. We'll see how well it works in practice over just working in theory ;)
« Last Edit: September 10, 2018, 08:41:52 pm by Malenko »
If you are helping someone and expecting something in return, you are doing business not kindness.

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:June 20, 2019, 07:23:11 pm
Re: Gingerballs 2.0 Advanced Prototype
« Reply #27 on: September 10, 2018, 10:40:11 pm »
Sorry if I'm jumping ahead, but what monitor/tv brand/model should go in these? Vpin noob here. :-\

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #28 on: September 10, 2018, 10:58:27 pm »
Sorry if I'm jumping ahead, but what monitor/tv brand/model should go in these? Vpin noob here. :-\

the backglass doesn't matter that much, Im using an OLD Dell 4:3 LCD with bad viewing angles. for the playfield I have a 60Hz ASUS brand LCD with great response times. If you have the budget it only gets better with a 4K monitor. a 120 Hz or higher also helps.
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #29 on: October 17, 2018, 06:42:18 pm »
Shoved everything inside....




mobo lost settings, so back display is disabled in BIOS  -_-


Got that sorted:


underbody LED looks great:


I need to go through and change the backglasses to exclude the bezel and DMD, but the external DMD is rawkin


Wife tested and approved!
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #30 on: October 20, 2018, 11:17:47 pm »
I started dabbling in ginger's side art......

If you are helping someone and expecting something in return, you are doing business not kindness.

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1004
  • Last login:Yesterday at 09:39:49 am
Re: Gingerballs 2.0 Advanced Prototype
« Reply #31 on: October 21, 2018, 08:42:57 am »
 :applaud:
       Been watching this from the start. Looks great!
Loving those LEDs (might have to add those on mine)

 :cheers:

BadMouth

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 8521
  • Last login:Yesterday at 07:43:58 am
  • ...
Re: Gingerballs 2.0 Advanced Prototype
« Reply #32 on: October 21, 2018, 09:08:45 am »
What size screens would I need to have laying around to use this kit?

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #33 on: October 21, 2018, 07:45:34 pm »
What size screens would I need to have laying around to use this kit?

PF is 24" , Backglass is 19" 4:3
Pin2DMD in the DMD hole.
If you are helping someone and expecting something in return, you are doing business not kindness.

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6184
  • Last login:Yesterday at 09:58:02 pm
    • Bella's Arcade
Re: Gingerballs 2.0 Advanced Prototype
« Reply #34 on: October 23, 2018, 05:23:01 am »
Wow this looks really great.  How hard is setting up the software?  I really wish I had room for a pin like this in my house...


Sent from my iPad using Tapatalk

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #35 on: October 23, 2018, 10:11:12 am »
Really the setup is easier than ever. A ton of tables now run on VPX , so you no longer have to keep 3 or 4 versions of VP9 including physmod5. VPX also unifies the tables so that there is no more "cabinet" version, desktop version, etc  I'll be making the change from PinballX over to PopUp for front ends.


I'm not trying to put words in Haruman's mouth but I believe the kit is still set to be modular.
So in theory there should be 1 or 2 bases to pick from (24" screen or smaller and 27" screen) , and at least 2 heads, maybe 4. Widescreen, Widescreen + DMD, 4:3, and 4:3+DMD.



I just need to set up a buncha tables, figure out the lockdown bar, and maybe build a stand with real pinball legs for it.
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #36 on: October 23, 2018, 09:32:22 pm »
Got the DMD colorizations working (most of the time)




WWF Royal Rumble colorization by CB3
If you are helping someone and expecting something in return, you are doing business not kindness.

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6184
  • Last login:Yesterday at 09:58:02 pm
    • Bella's Arcade
Re: Gingerballs 2.0 Advanced Prototype
« Reply #37 on: October 24, 2018, 09:57:37 am »
Looks great!  Really like how this is coming together.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #38 on: November 12, 2018, 07:09:54 pm »
art mock up, not worrying about borderlines and laser beams and ufos ;p


« Last Edit: January 07, 2019, 05:43:51 pm by Malenko »
If you are helping someone and expecting something in return, you are doing business not kindness.

opt2not

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5336
  • Last login:Today at 01:05:29 am
Re: Gingerballs 2.0 Advanced Prototype
« Reply #39 on: November 13, 2018, 01:00:49 am »
That is definitely not shoddy.  ;)

Laythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 445
  • Last login:Yesterday at 11:03:52 pm
  • "-smurfing- delivers." - Yots
    • forum.arcadecontrols.com/index.php/topic,149109.0.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #40 on: November 17, 2018, 06:45:43 am »
Good side art. 

I feel like the ball maybe wants some fake horizon chrome.  Kinda like:




Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #41 on: November 17, 2018, 10:23:30 am »
I like that, but it's already at the printers.  I'll get 2 sets and use a sharpie? :p
If you are helping someone and expecting something in return, you are doing business not kindness.

Laythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 445
  • Last login:Yesterday at 11:03:52 pm
  • "-smurfing- delivers." - Yots
    • forum.arcadecontrols.com/index.php/topic,149109.0.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #42 on: November 17, 2018, 02:41:13 pm »
Oops.  Sorry to be That Guy. 

I like the art, either way!

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #43 on: November 17, 2018, 08:06:27 pm »
Haha no worries!

That's actually the pinball from some stern logo, I thought it was neat so I used it. I'm finally buttoning up this build but I'm still not 100% on how I'm going to do the lockdown bar area
If you are helping someone and expecting something in return, you are doing business not kindness.

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • Last login:Yesterday at 10:01:48 pm
  • Bitches love Centipede
Re: Gingerballs 2.0 Advanced Prototype
« Reply #44 on: November 18, 2018, 01:06:11 am »
Eff Stern. Williams all day, nukka.
%Bartop

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #45 on: November 18, 2018, 07:22:04 am »
Eff Stern. Williams all day, nukka.

I stole their art work, what more do you want from me?
If you are helping someone and expecting something in return, you are doing business not kindness.

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:June 20, 2019, 07:23:11 pm
Re: Gingerballs 2.0 Advanced Prototype
« Reply #46 on: November 19, 2018, 02:02:15 pm »
Nice juicy arwork! I'm glad you have pics of most of the internals.  I can follow most of what youve done.  Your graphics card looks like a Radeon 280?  Great work!

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype
« Reply #47 on: November 22, 2018, 09:57:36 pm »
Your graphics card looks like a Radeon 280?  Great work!
Its an ATI chipset  GIGABYTE R9-390 Windforce G1 Gaming (8GB)
Im an Nvidia guy through and through, but I got that card with part of another purchase and decided to put it to work.

Cut the side rails to length:


Cut 2 small pieces of the aluminum L channel and JB welded it to 2 pieces of 3D printed lockdown bar parts.



and made sure it fit perfectly:


I'll fill in the gap and smooth it all out with Bondo.
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #48 on: December 01, 2018, 12:44:24 pm »
so its together, needs more finish work, like a nice bondo glaze and a ---steaming pile of meadow muffin--- ton of sanding and painting.


Im aware the gap between pieces is noticable, but this is just the foundation part of the "bar"






PRESENTING..... The Ginger Table!
I had a bunch of left over 2x4s from my ongoing bathroom build and a set of pinball legs, so I did this:


and added more boards to the top to be a table:


I basically cut some 2x4s to be slightly bigger than the base of Gingerballs. Added extra boards to the front and back so ginger could sit on top and I left it open on the bottom so the LED lighting on the bottom of ginger could shine through. I "counter sunk" the bolt holes in the inside with a spade bit.

I finally got all the stuff inside and wired as best I could without being sloppy, but there's only so much you can do.

PC
USB Hub
USB Wifi adapter (for my boy Rodney Black)
USB receiver for KB/Mouse
LED light strip with USB end
Motherboard
850W Power Supply
ATI video card
IPAC2
Pin2DMD
SainSmart USB Relay
7 Relays for "Force Feed Back"
17" 4:3 back glass monitor
22" Samsung PF monitor
Extra intake fan at mid body
120mm exhaust fan

Just barely enough room and still have pretty good airflow!

So put the displays back in:


And buttoned it all up.



Net step is making GingerTable® prettier. Probably just a semi gloss paint on the wood and call it a day. I used the same aluminum for the rails this time, but the edges are under the lockdown bar, so the corners arent bitey like on GB1.0.  For ginger itself, the only thing really left to do is add a ---steaming pile of meadow muffin--- ton more tables.
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #49 on: December 04, 2018, 08:17:12 pm »
pulled the legs, hit it with 2 coats of gloss black. I wanted to use semi gloss but didnt have any on the shelf.



2 days to cure and the legs back on. Now to square away software
If you are helping someone and expecting something in return, you are doing business not kindness.

Laythe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 445
  • Last login:Yesterday at 11:03:52 pm
  • "-smurfing- delivers." - Yots
    • forum.arcadecontrols.com/index.php/topic,149109.0.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #50 on: December 04, 2018, 11:47:50 pm »
I like your tabletable! 


Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3156
  • Last login:April 26, 2019, 02:25:09 pm
  • And to the death god we say, "Not today!"
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #51 on: December 14, 2018, 03:16:34 pm »
Gah - a 3D printed lock down bar!  That's a wonderful idea!  Those front corners were literally the only parts I didn't like about Gingerballs v1, this is a wonderful development.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10260
  • Last login:Yesterday at 10:00:48 pm
  • boom
    • Arcade Madness
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #52 on: December 14, 2018, 06:16:41 pm »
Gah - a 3D printed lock down bar!  That's a wonderful idea!  Those front corners were literally the only parts I didn't like about Gingerballs v1, this is a wonderful development.

You and your sensitive LARPing hands...   :lol

smass

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 298
  • Last login:Yesterday at 08:15:54 pm
  • Cheapskate Arcade
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #53 on: December 14, 2018, 09:35:55 pm »
I actually really like the idea of using a 24" monitor for the playfield.  What size will the smaller head units work with?  17" 4:3?

ark_ader

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5645
  • Last login:March 02, 2019, 07:35:34 pm
  • I glow in the dark.
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #54 on: December 15, 2018, 08:08:05 pm »
Wow! Just wow.  Some really good work there.  :applaud:

Questions:

Monitors sitting flat like that, any issues?
Heat - with all that PC gear under the monitor - fire issue?  I know there is a fan, but is that for incoming air?
Where did you the LED matrix?  That looks the business.

I bet Adams Family and Funhouse will be fun to play on that coffin.

I want one!  ;D

 
If I had only one wish, it would be for three more wishes.

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • Last login:Yesterday at 10:01:48 pm
  • Bitches love Centipede
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #55 on: December 15, 2018, 08:49:33 pm »
Heat - with all that PC gear under the monitor - fire issue?  I know there is a fan, but is that for incoming air?

It's only caught fire 3 times. And each time the inferno has been successively smaller. It's basically under control at this point.
%Bartop

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #56 on: December 15, 2018, 10:18:32 pm »
I actually really like the idea of using a 24" monitor for the playfield.  What size will the smaller head units work with?  17" 4:3?

I am using a 17" 4:3 , whatever the retail kits ship with is up to Lee.

Monitors sitting flat like that, any issues?
Heat - with all that PC gear under the monitor - fire issue?  I know there is a fan, but is that for incoming air?
Where did you the LED matrix?  That looks the business.
So the backglass monitor has peg board behind it and even after being on for hours the head isnt hot at all.
The PF monitor isnt flat, the back of the monitor is slightly elevated. Air comes in through the power supply and the bottom fan, air is exhausted out the giant fan in the back. Air can also escape via the hole to the head and vent out the back of that as well.
The bottom doesnt have an LED matrix, its just an always on powered by USB strip.

The biggest change Ive made is that the backglass is no longer rendered by the onboard card.  Having the discreet card running both the backglass and play field has improved frame rates and oddly enough, runs cooler.
I have my game list pretty much done and all the issues sorted, I just need to set up the front end (looking to move from PinballX to PinUpPopper) I'll take more pix and some vids after the side art arrives.

If anyone else DOES make one of these, I'd love to see it.
« Last Edit: December 24, 2018, 07:18:43 pm by Malenko »
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #57 on: January 05, 2019, 10:09:18 pm »
Decided to do 1 last re-wire. The air flow could be better in the body, so I decided to get everything as clean as I could.


Replaced the thermaltake intake fan with a ThermalTake RIING fan, so you could say I like it cause i put a riing on it.


Wired in the power switch/pass through.

Its wired into a 3 port power cord that also has 3 USB ports. The undercab LED lighting is plugged into the USB port, that was the lighting down there tells you when the power is switched to the on position. The PC is hard wired to the passthrough and has power even when the cab is off. This prevents the CMOS battery from draining and also allows me to pick shut down, and kill the monitors and speaker without waiting.


I also added a Dell Soundbar to the top of the head, that is plugged into the aforementioned mini power strip. This allows better direct sound and a much easier way to control volume as the sound bar has a volume control on the side. While the Dell soundbar isnt exactly audiophile gear, it sounds much better than the tiny build in laptop speakers.

I also finally got around to adding a lit up plunger button, and gold leaf buttons for the flippers (Thanks JDBailey1206!)

Now I need to wire up the LED for the coin button too
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #58 on: January 07, 2019, 05:44:38 pm »
art mock up, not worrying about borderlines and laser beams and ufos ;p


sooooooooon........

If you are helping someone and expecting something in return, you are doing business not kindness.

opt2not

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5336
  • Last login:Today at 01:05:29 am
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #59 on: January 07, 2019, 06:22:24 pm »
This is going to be purdy...  I was also thinking it *could* use some side art on the top LCD box.  Along the thin sides of the box.  Nothing crazy, just a simplified continuation of the background in the main side-art.   

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #60 on: January 07, 2019, 06:47:25 pm »
its a ball hair over 2 inches wide so I gave up on it and did the DMD surround instead.
If you are helping someone and expecting something in return, you are doing business not kindness.

opt2not

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5336
  • Last login:Today at 01:05:29 am
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #61 on: January 07, 2019, 07:04:12 pm »
its a ball hair over 2 inches wide so I gave up on it and did the DMD surround instead.

Still worth it IMO :D

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3078
  • Last login:Today at 04:39:31 am
  • Buy a Multimeter
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #62 on: January 07, 2019, 08:23:13 pm »
Is that a metric ball hair or SAE?

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 100% more table!
« Reply #63 on: January 08, 2019, 11:03:13 am »
A ginger ball hair obviously.

Gonna hafta sell Ginger2.0 to pay for Ginger 3.0
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, now with 200% more art!
« Reply #64 on: January 15, 2019, 09:44:52 pm »
Big thanks to Ken for the print jerb. Everything is amazing as always.

Started with the front. Had to move around the buttons cause I forgot I color coded the art to what was already installed.  I also need a replacement bulb for my GGG coin button thingie.


Changed the side buttons to both be white:


Before cutting out the holes (used a light behind the holes to line up the art)


Buttons installed:


Everything back in place:




I'm also not so secretly coloring Terminator 3


I still need to install the DMD surround art but that involves removing the DMD and cutting the hole out.
I also need to finish the lock down bar.
If you are helping someone and expecting something in return, you are doing business not kindness.

Arroyo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 619
  • Last login:Today at 02:09:03 am
  • Budgets are boring
    • newforum.arcadecontrols.com/index.php/topic,156267.0.html
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #65 on: January 15, 2019, 11:44:47 pm »
Been following this thread since the beginning but don’t think I’ve commented before.  Just wanted to say that this is crazy good work packing all that in.  Seems like the best designs make it look like it would be easy but when you pop the hood are blown away by the complexity.  Nice work.

opt2not

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5336
  • Last login:Today at 01:05:29 am
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #66 on: January 16, 2019, 10:20:43 am »
It turned out really great!  :cheers:

Rockstead

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 83
  • Last login:Yesterday at 08:23:07 pm
  • I want to build my own arcade controls!
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #67 on: January 16, 2019, 02:16:31 pm »
Malenko,

Are you considering one of those soft/hard nudge boards in your next iteration?

I would love to eventually have a full size vpin but was hoping the nudge would be as true to life as possible, any technical limitations that prevented you from using it in 2.0?


Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:June 20, 2019, 07:23:11 pm
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #68 on: January 16, 2019, 03:41:07 pm »
Very nice result,  I want one!   :cheers:

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #69 on: January 28, 2019, 10:38:14 am »
Malenko,

Are you considering one of those soft/hard nudge boards in your next iteration?
I would love to eventually have a full size vpin but was hoping the nudge would be as true to life as possible, any technical limitations that prevented you from using it in 2.0?

I'm considering a pinscape for 3.0 , which will be a hand cut closer to a full sized cab based on a WPC machine. There was no technical limitation preventing me from using one in Ginger 2.0 , but 2.0 wasn't a fresh start just mostly a hardware migration and adding in a pin2DMD.  Honestly the only thing I couldn't shove in there would be a shaker and/or a subwoofer.

Very nice result,  I want one!   :cheers:
Lee will allegedly have one made for Zapcon. If I go to Zapcon, Im not sure how I could get Ginger 2.0 there with me.
If you are helping someone and expecting something in return, you are doing business not kindness.

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6184
  • Last login:Yesterday at 09:58:02 pm
    • Bella's Arcade
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #70 on: January 28, 2019, 12:11:16 pm »
Malenko - this thing is really great.  Any chance we could see a vid of it in action?

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #71 on: January 28, 2019, 01:39:05 pm »
shur, any particular tables you want to see?

Front end isnt set up, so I have to launch everything manually.
If you are helping someone and expecting something in return, you are doing business not kindness.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #72 on: January 28, 2019, 08:35:29 pm »
Terminator 3:

ACDC Luci:

Lethal Weapon 3:

TMNT:
« Last Edit: January 28, 2019, 10:36:44 pm by Malenko »
If you are helping someone and expecting something in return, you are doing business not kindness.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2187
  • Last login:June 17, 2019, 08:51:27 pm
  • If you don't try, you have no chance at innovation
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #73 on: January 29, 2019, 09:10:11 am »
why is your front end not set up?
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #74 on: January 29, 2019, 09:42:43 am »
why is your front end not set up?

Cant decide if I want to make the leap to pinup. Also, making games colored (not racist!): http://vpuniverse.com/forums/topic/3616-tmnt/
If you are helping someone and expecting something in return, you are doing business not kindness.

Gilrock

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 447
  • Last login:Yesterday at 08:03:43 pm
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #75 on: January 29, 2019, 10:24:00 am »
I really like the PinUp system.  When you navigate through the tables it just feels snappier than anything else I've used.  I'm only up to date with what was available back in July.  And using the PupPack content from Mr. Pinkadia is pretty awesome.

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6184
  • Last login:Yesterday at 09:58:02 pm
    • Bella's Arcade
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #76 on: January 29, 2019, 02:08:26 pm »
Terminator 3:

ACDC Luci:

Lethal Weapon 3:

TMNT:

It's so freaking cool.  I'd love to try building one but I don't have anywhere to put it.

thomas_surles

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1946
  • Last login:June 23, 2019, 09:31:37 pm
Re: Gingerballs 2.0 Advanced Prototype, art is now installed.
« Reply #77 on: April 15, 2019, 10:53:41 pm »
How the hell did I miss the revenge of gingerballs? Very nice. Lockdown bar was unique. And the table lol I loved it.