4x6" Speaker Grills - Where to find them?

[Piss Ant]

I'm in a rural area & having trouble locating 4x6" rectangular speaker grills for my project. Local audio store is a no go & I can only find circular ones on the net.  I've found entire 4x6" speaker sets, but not just the grills.  Can anyone help me out?  Any suggestions would be appreciated.
Thanks!

[crashwg]

I would try wal*mart and the like.

[nighthawk2099]

Found some at Radio Shack.

[Piss Ant]

Thanks for the suggestions - but I struck out  Our Radio Shack has discontiued them & While Wal-Mart has many items they don't carry them either.  I'll see if I can't find another electornics store - or anyone know of a internet site.
Thanks!

[nighthawk2099]

Humm.... You might also wan to try BestBuys or maybe an auto parts store like Autozone...

[General Zod]

One more option, and you may get a little dirty ...  


I've had even better luck going to some old junkyards and ripping out a few of the grills from beat-up cars and trucks.

As always , you'll more than likely find the radio and speakers missing, but the grills are still in place. Grab a few, and at the most, you'll probably pay about $2.00 for a handful.

[Piss Ant]

Thanks Nighthawk2099 - No Best Buys/CC's etc anywhere near me. However we do have an Autozone.

Thanks General Zod, that's one I definately hadn't thought of.

[spystyle]

When I had to find speaker grills I called used car dealers until I found some.

Junk yards and Ebay are a good bet too

or maybe contact the speaker manufacturer and see what they recommend

this google search found some from porche and chevy :
http://www.google.com/search?hl=en&ie=UTF-8&q=4x6+Speaker+Grills+

lastly, if the speakers are cabinet mounted you could cut that cabinet into grills with a router as seen in the attached picture

Dig it?
Craig

[Wenis]

www.partsexpress.com they have alot of stuff like that

[fixedpigs]

they have a lot of stuff 'like' that...but they don't have any 4x6" grilles...

i too...am on a search for 4x6" speaker grilles...and through my googling...i was lead to the good ol' byoac boards...to this very thread...-=)
i already searched partsexpress.com before coming here...

i'm thinking of just making my own...all i'd have to do is buy some fabric and make a couple of frames...

[mflint]

Try this place
http://www.magnadyne.com/index.cfm/MasterAction/WebCat/Web_CatID/264.cfm

or

http://store.cal-mustang.com/showdetl-7-3537-19-0.html

hope this helps.

[fixedpigs]

ah...yes...!

thanks...!