Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Ami model 91 error 30  (Read 530 times)

0 Members and 1 Guest are viewing this topic.

Ratfink4600

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Ami model 91 error 30
« on: July 29, 2018, 10:40:20 pm »
Unit powers up has error 30 then 32 later clear codes and comes up instantly after putting back to on....  Unit does not attempt to rotate

Ken Layton

  • Guru
  • Trade Count: (0)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 6847
  • Technician
Re: Ami model 91 error 30
« Reply #1 on: July 29, 2018, 11:38:51 pm »
30 and 32 are magazine optical switch errors. Could be dirty/mis-adjusted/defective magazine optical switches. Or could be a problem with the Mechanism Control Board.

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1047
Re: Ami model 91 error 30
« Reply #2 on: August 03, 2018, 07:35:39 am »
Ken's take on the error codes are correct, I would check that the transfer motor and the cam switches are not shorting out on the uninsulated spade connections.

Regards
Alan

Alan Hood
ami-man
UK

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31