Hi all,
I have a WG7500 that is missing the power cord. From what I understand it will work with or without an ISO transformer since it has one built in. So I can connect it to a grounded outlet, in my case it will be temporary while I work on it with a TPG.
I grabbed the pic below from the following topic:
http://forum.arcadecontrols.com/index.php?topic=562.0My question, I'm rewiring it to a 3 prong cord, and I know that the middle pin is the ground, but where do the neutral (white) and hot (black) wires go on the connector? I'm assuming it doesn't matter when connected to an ISO, but since I'm plugging it into the wall for testing purposes, I'm sure it matters.
The schematics here say pin 1 is the black wire (hot) and pin 3 is the white wire (neutral). I need to take a look again, but can I assume pin 1 is on the left when looking at the chassis from behind?
Thanks in advance!
DeL