Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: [Solved][GroovyArcade] How to edit video port after graphic card swap?  (Read 484 times)

0 Members and 1 Guest are viewing this topic.

Cucurbitacée

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
Hi,

I couldn't find any answer for this specific topic, so I'll ask directly. In my quest to fix my supersonic fast 2018 install (http://forum.arcadecontrols.com/index.php/topic,130667.msg1649528.html#msg1649528) I used another graphic card. But as the new one is working on VGA-0 instead of DVI-1 and I don't  get any picture.

I edited /etc/X11/xorg.conf and changed the value, but it doesn't work. Which I guess makes sense, X11 is not running a start. Anyway, can someone tell me how I can change the active port?

Thanks
« Last Edit: April 14, 2018, 01:35:39 pm by Cucurbitacée »

Cucurbitacée

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
Re: [GroovyArcade] How to edit video port after graphic card swap?
« Reply #1 on: April 14, 2018, 01:34:59 pm »
Hi,

I reply to myself as I found the answer after a long grep on the whole drive. I'll put the answer here in case someone else stumble on this in the future. You need to edit
Code: [Select]
/boot/syslinux/syslinux.cfgI don't know why but I couldn't see this file (or the content of the whole /boot folder for that matter) with the LiveCD, I had to swap the monitor with an LCD one.

Anyway, case closed for this one. ;D

ves

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 220
Hi

For xorg you need select again a monitro from menú vídeo monitor.

For boot in the menú vídeo boot options

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6090
Basically, redo your video configuration from gasetup.
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead or pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31