Using 2 Pacled64 in Ledblinky (Not working!)

[sterling8484]

Attempting to use 2 Pacled 64’s in my 4 player Xtension controller. Switched to RGB joysticks/buttons, mapped and working for left side, total of 2 joysticks and 10 buttons. When I attempt to assign an ID for the 2nd Pacled64 board in Ledblinky to map the rest of the sticks/buttons it will not show the board as active like the first. I have the first pac as ID 1, assigning the 2nd one as ID 2 doesn’t work. Any ideas or instruction on how to use 2 of these together would be greatly appreciated.

[Ginsonic]

Did you assign ID 2 (real hardware ID) to the second PacLed in the PacLed64 tool too?

[sterling8484]

Talked to Andy from Ultimarc and he said the same thing. I haven’t because I thought I could do that through Windows 10. I am going to try to assign the id’s through the Pacled utility. I will update this post as soon as can get home and try it. Thanks for the response, much appreciated.

[Nephasth]

That's a lot of ---smurfing--- LEDs...

[sterling8484]

Figured it out, just had to hook each one up separately, now they are identified as 1 and 2 and I can map the second Pacled64. Thanks for the help Ginsonic!

[Ginsonic]

You 're welcome