Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


Author Topic: Rowe R85  (Read 1004 times)

0 Members and 1 Guest are viewing this topic.


  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:September 17, 2019, 11:29:07 pm
  • I want to build my own arcade controls!
Rowe R85
« on: March 23, 2018, 05:38:19 pm »
Hi I'm working on a friends Rowe R85 with a 601-07438 125 watt amp in it with a 6-08552-01 pre amp board.  The amp has 1 channel out and I think it is in the preamp board so I removed to look at it and there is a light bulb looking thing hanging by one wire. I never have seen anything like this and can not find it in the book I have. can anyone tell me where I can get replacements.
Thank You for your time.



  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1070
  • Last login:September 12, 2019, 07:45:19 am
Re: Rowe R85
« Reply #1 on: March 26, 2018, 08:21:59 am »
Hello Dave,

The lamp is a pre amp lamp, if the wires have rotted off (it happens on the original lamps) the result is that that channel has no volume.

If you can not get any, I do have a small stcock of them. Send me a PM for details of how to contact me in the UK


Alan Hood