Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Rowe Ami R-91 transfer arm problem  (Read 819 times)

0 Members and 1 Guest are viewing this topic.

bluefish628

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Rowe Ami R-91 transfer arm problem
« on: February 26, 2018, 11:24:50 pm »
Iím having a problem with the transfer arm getting stuck between picking up the record and playing it on the turn table. I canít even do it manually, it gets stuck in between the rotator assembly and wonít move unless I turn it off and then I can bring the arm back to normal. It seems like the arm is moving to far forward every time and getting stuck any tips how to fix or adjust this? [emoji120]


Sent from my iPhone using Tapatalk

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1041
Re: Rowe Ami R-91 transfer arm problem
« Reply #1 on: February 27, 2018, 05:53:34 am »
Hello bluefish628,

I assume that you are saying that the gripper bow does not turn to the left or the right and becomes stuck on the turntable!

You need to strip down the gripper bow assembly and check on the plastic moulding of the gripper bow arm there is two small pips on each side of the moulding if these are worn or damaged the index solenoids do not have anything to turn over the arm.

Regards
Alan

Alan Hood
ami-man
UK

bluefish628

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: Rowe Ami R-91 transfer arm problem
« Reply #2 on: February 27, 2018, 09:49:56 am »
Hello bluefish628,

I assume that you are saying that the gripper bow does not turn to the left or the right and becomes stuck on the turntable!

You need to strip down the gripper bow assembly and check on the plastic moulding of the gripper bow arm there is two small pips on each side of the moulding if these are worn or damaged the index solenoids do not have anything to turn over the arm.

Regards
Alan

Alan Hood
ami-man
UK
[/quote


Thanks I will check it out



Sent from my iPhone using Tapatalk

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31