Author Topic: Eygo 27" Monitor Dimentions? (Read 2048 times)

patrick · « **on:** May 10, 2002, 08:06:35 pm »

I've looked everywhere...
Can anyone out there using an Eygo 27" Monitor give me the dimentions? Thanks!

Craig Servin · « **Reply #1 on:** May 13, 2002, 08:44:08 am »

If no one else answers before I do I will measure mine when I get home from work tonight and post the dimensions.

I had to take the steal frame off and use a saws-all to remove a small 1/2" lip to be able to slide it into my cabinate.

Craig Servin · « **Reply #2 on:** May 15, 2002, 06:33:12 pm »

Sorry it took me so long. It is 25" wide by 19" high by 17" deep.

On the width there is about a 1/2" lip that runs out from the sides parrallel to the front on both the right and left side( I had to cut these off because I had already built the cabinet.

The depth and height are also a little difficult to measure since the metal frame that holds the glass and electronics holds the moniter at a slight angle.

I am very happy with mine. For the price it was awsome.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Eygo 27" Monitor Dimentions? (Read 2048 times)

patrick

Eygo 27" Monitor Dimentions?

Craig Servin

Re: Eygo 27" Monitor Dimentions?

Craig Servin

Re: Eygo 27" Monitor Dimentions?