Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Eygo 27" Monitor Dimentions?  (Read 1232 times)

0 Members and 1 Guest are viewing this topic.

patrick

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:Never
  • I want to Build My Own Arcade Controls!!
Eygo 27" Monitor Dimentions?
« on: May 10, 2002, 08:06:35 pm »
I've looked everywhere...
Can anyone out there using an Eygo 27" Monitor give me the dimentions? Thanks!
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

Craig Servin

  • Guest
  • Trade Count: (0)
Re: Eygo 27" Monitor Dimentions?
« Reply #1 on: May 13, 2002, 08:44:08 am »
If no one else answers before I do I will measure mine when I get home from work tonight and post the dimensions.

I had to take the steal frame off and use a saws-all to remove a small 1/2" lip to be able to slide it into my cabinate.

« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

Craig Servin

  • Guest
  • Trade Count: (0)
Re: Eygo 27" Monitor Dimentions?
« Reply #2 on: May 15, 2002, 06:33:12 pm »
Sorry it took me so long.  It is 25" wide by 19" high by 17" deep.

On the width there is about a 1/2" lip that runs out from the sides parrallel to the front on both the right and left side( I had to cut these off because I had already built the cabinet.

The depth and height are also a little difficult to measure since the metal frame that holds the glass and electronics holds the moniter at a slight angle.

I am very happy with mine.  For the price it was awsome.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »