ok latest version for public is 1.04
https://teknogods.com/phpbb/viewtopic.php?f=83&t=38745all the info is in the readme but here it is
1. Install com0com from:
https://code.google.com/archive/p/powersdr-iq/downloads2. DO NOT TOUCH ANYTHING, JUST INSTALL IT!
3. Extract TeknoParrot package to any directory, NOT GAME DIRECTORY!
4. Run DumbJVSManager.exe
5. You will be required to put the settings for the first time. (joystick etc)
6. Use Autosetup to set the com0com settings
7. Press Test JVS Emulation to make sure it works!
8. Save settings
9. Set game directories using DumbJvsSettings.exe
10. Save settings.
11. Play the games, optionally click "Test" to enter test menu.
12. Have fun.
To use card reader you need to create a bat file as in step 1 and run before you load up dumbjvsmanager
- How to use card readers by running picodaemon with Parrotloader:
1. Run ParrotLoader.exe "D:\games\id6\picodaemon.exe" (Put real dir on your pc)
2. Now just run ID6 like you normally would, with card readers turned ON from the TEST MENU.
If you are UNSURE how to enable card readers, just delete %appdata%\TeknoParrot\SBUU_e2prom.bin in case it exists.
3. Enjoy!!!!
Card file is saved to: %appdata%\TeknoParrot\SBUU_card.bin