Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


Author Topic: Megatouch Gold issue  (Read 1648 times)

0 Members and 1 Guest are viewing this topic.


  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:May 15, 2017, 09:29:24 pm
  • I want to build my own arcade controls!
Megatouch Gold issue
« on: May 15, 2017, 09:29:00 pm »
Hey guys, new to the forum.  I recently acquired a megatouch gold.  I am having issues with one of the eproms in it.  It is the one right next to the Dallas chip.  It looks like someone had pulled it out and broken off one of the pins.  The machine seems to boot ok until it gets to the menu screen.  There it has a popup that says to contact a local distributor.  The screen then darkens and locks up.  Does anyone have the ability/interest to burn a replacement eprom for me?  Please contact me with info if so.

Thanks Aaron


  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 601
  • Last login:Yesterday at 09:09:59 pm
Re: Megatouch Gold issue
« Reply #1 on: May 15, 2017, 11:19:13 pm »
Is there any label on it with a version# or something? I have a bunch of io cards, one might have gold eproms. If you can give me some info i will dig through my junk bins.