Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Megatouch Crown cab - No video from VGA?  (Read 1143 times)

0 Members and 1 Guest are viewing this topic.

Foxsec

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:July 01, 2017, 09:26:10 am
  • I want to build my own arcade controls!
Megatouch Crown cab - No video from VGA?
« on: April 30, 2017, 11:11:04 am »
Hi Guys.

Got my hands on a Megatouch Maxx Crown standing unit and I can't for the life of me get video to come from the VGA port on the mobo.

At first I thought the CRT was busted (still might be as it shows no signs of life when the cab is turned on), I tested it with a different monitor by unhooking the vga that leads to the cabs CRT and adding one that leads to my external monitor but whenever the cab is turned on I still get a 'no signal detected'.

I'm a bit stumped on what to try next, I don't really want to remove the whole mobo if it's an easy fix.

Anyone have any suggestions?

Thanks :)

Foxsec

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:July 01, 2017, 09:26:10 am
  • I want to build my own arcade controls!
Re: Megatouch Crown cab - No video from VGA?
« Reply #1 on: April 30, 2017, 11:50:57 am »
The thing boots, the HDD spins etc but there is just no display whatsoever.