Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: trackball issue  (Read 984 times)

0 Members and 1 Guest are viewing this topic.

shitoken

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 20
  • Last login:May 30, 2025, 07:41:27 am
  • I want to build my own arcade controls!
trackball issue
« on: April 26, 2017, 04:46:49 am »
Hi friends
My panel setup with I/O ultimate board from ultimarc with his spinner and rgb buttons. I did not bought trackball  because my control panel already have china made usb ball tracker which I plug into the mother board directly.

Now here is the problem: -  :banghead:

I have 1 real mouse with keyboard , 1 Spinner which plugged to I/O encoder (This both works fine)

But the trackball will not function until I remove the spinner from the ultimarc I/O board.
Is there a limit of max 2 mouse per motherboard?
I doubt should not be otherwise how other members can use spinners, mouse, trackball all at same time?

Because my control panel was cut to the size of this trackball,  I cannot replace the one from ultimarc.
Do you have idea what is going wrong my setup?

Thank you so much
« Last Edit: April 26, 2017, 04:48:24 am by shitoken »