Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: PACLED 64 giving me trouble  (Read 1347 times)

0 Members and 1 Guest are viewing this topic.

MydknyteStyrm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 331
  • Last login:March 20, 2024, 12:19:41 pm
  • Makeup FX Gamer
PACLED 64 giving me trouble
« on: February 15, 2017, 05:43:00 am »
I have three PacLed64 boards in my cab, and once in a while the third one won't turn on. I notice it because half my board is unlit. The only fix is to unplug the power and replug it in. If I unplug the whole cab, then back on, it works. Usually I leave the cab plugged in, so it's kind of an annoyance. Is my PACLED going dead?


Sent from my iPhone using Tapatalk

lowlytech

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 74
  • Last login:February 07, 2019, 08:12:12 am
  • I want to build my own arcade controls!
Re: PACLED 64 giving me trouble
« Reply #1 on: February 15, 2017, 08:38:26 am »
Might try a different USB cable or USB port on your host system?  Other than that, maybe something is awry with the controller.

Edit.. Are your controllers plugged straight into system ports or are you using a USB hub??
« Last Edit: February 15, 2017, 08:48:53 am by lowlytech »

MydknyteStyrm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 331
  • Last login:March 20, 2024, 12:19:41 pm
  • Makeup FX Gamer
Re: PACLED 64 giving me trouble
« Reply #2 on: February 17, 2017, 11:21:55 am »
I changed the USB plug into another port and it seems to be fine now. It's looking like my USB hub is failing as far as power management


Sent from my iPhone using Tapatalk