Author Topic: GGG Roundhouse joystick question. (Read 1274 times)

lowlytech · « **on:** February 14, 2017, 09:55:06 am »

I have two of these roundhouse arcade sticks that I was going to use on my control panel. One main question. Does this top come off so I can undermount the joystick? I can't seem to loosen it at all. Thought I would ask before I broke it. I noticed GGG didn't have a color option with this particular joystick. Looks like the only way is to disassemble the 4 phillip screws in the base of the joystick and then try to put it back together very tediously. If that doesn't' work out is the spitfire a good comparable joystick?

lowlytech · « **Reply #1 on:** February 14, 2017, 01:16:37 pm »

Kind of embarrassed, there was a nut on the bottom that released the joystick to allow undermouting, however try as I might, this balltop will not come off. Was wanting a different color, but red will have to do I suppose..

DeLuSioNal29 · « **Reply #2 on:** February 14, 2017, 01:36:06 pm »

You can always upgrade to a Sanwa JLF. The ball top screws off and there are a TON of options.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: GGG Roundhouse joystick question. (Read 1274 times)

lowlytech

GGG Roundhouse joystick question.

lowlytech

Re: GGG Roundhouse joystick question.

DeLuSioNal29

Re: GGG Roundhouse joystick question.