Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Anyone done a Wooden Victorian/Steampunk look? What colours would work?  (Read 1185 times)

0 Members and 3 Guests are viewing this topic.

ugleymatt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • Last login:October 11, 2022, 12:13:37 pm
  • I want to build my own arcade controls!
I'm in the process of designing my bartop that will be made out of plywood as i need it to be portable. Seeing as the plywood has a nice wood grain finish i am considering waxing it a dark oak, that will match a lot of the woodwork in our Victorian house. I then thought of maybe going for a steampunk theme.

So then i start thinking about colour schemes for the controls. Black would be an obvious choice but then i though maybe light up blue buttons and joystick might fit with that theme too. Black T-molding maybe as well. I would have antique brass handles on the side to carry it.

The only issue is that i had set my heart on leaf spring buttons and joy sticks, so that kinda rules out the illimunated ones right?

Ian

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1060
  • Last login:September 26, 2021, 01:50:35 am
  • "A day without Laughter is a day wasted"
Re: Anyone done a Wooden Victorian/Steampunk look? What colours would work?
« Reply #1 on: January 30, 2017, 09:33:30 am »
Well, there is monster arcade...

http://steampunkworkshop.com/steampunk-mame/

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2354
  • Last login:July 31, 2025, 06:41:41 pm
Re: Anyone done a Wooden Victorian/Steampunk look? What colours would work?
« Reply #2 on: January 30, 2017, 03:40:55 pm »
For a steampunk style project documented on BYOAC with plenty of timber work brass fittings etc, check out drventure's project below:

http://forum.arcadecontrols.com/index.php/topic,88515.680.html.