Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Need help with Perfect Solutions Switcher  (Read 1092 times)

0 Members and 1 Guest are viewing this topic.

norm44lsu

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:December 16, 2016, 10:49:28 am
  • I want to build my own arcade controls!
Need help with Perfect Solutions Switcher
« on: December 09, 2016, 06:48:05 pm »
Hi -
New to the forum.  I have a SSB cabinet.  Just picked up a perfect solutions switcher kit, and a golden tee fore HDD & green board.  Installed the switcher kit, board & HDD in the SSB cabinet.  SSB boots up and runs with no issues.  However it looks like I'm not getting power to the Golden Tee board or HDD.  None of the board LEDs are light.  I have 4pin molex connectors running to both bypass slots on the GT board, and one running to the HDD.  Have the JAMMA harness from the GT board running to the switcher following all of the instructions for the switcher.  All are coming from a new power supply (not piggy backed off of the existing SSB one).  Am I missing something simple, or could it be a bad board? 

Appreciate any insight.  Used to work on PCs years ago, but this is my first try with arcade games.

Thanks.