Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: So ... 3d Printers....  (Read 47790 times)

0 Members and 1 Guest are viewing this topic.

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1317
  • Last login:January 22, 2020, 11:47:54 pm
  • Bitches love Centipede
Re: So ... 3d Printers....
« Reply #680 on: March 20, 2018, 10:17:05 am »
Cash in hand for a dickbutt cookie cutter.  Not even joking.

Use that cash to get to Zapcon, and you get one for free...  :P
%Bartop

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13665
  • Last login:June 07, 2019, 05:07:28 pm
  • Be the change you want to see in the world.
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: So ... 3d Printers....
« Reply #681 on: March 20, 2018, 11:12:56 am »
All this because I drew a dickbutt on Paul's poster 2 years ago.   
If you are helping someone and expecting something in return, you are doing business not kindness.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19181
  • Last login:Today at 02:20:23 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: So ... 3d Printers....
« Reply #682 on: March 20, 2018, 11:27:58 am »
Cash in hand for a dickbutt cookie cutter.  Not even joking.



Made this for my homie JulesWallet
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19181
  • Last login:Today at 02:20:23 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: So ... 3d Printers....
« Reply #683 on: March 20, 2018, 11:28:25 am »
Cash in hand for a dickbutt cookie cutter.  Not even joking.

Use that cash to get to Zapcon, and you get one for free...  :P

Tirekickers gotta tirekick
***Build what you dig, bro. Build what you dig.***

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #684 on: March 30, 2018, 11:33:41 am »
Ive been a busy 3D printing elf!

So firstly I designed my first 3D model, a charging dock for a PSP and printed that:



I also printed this as a surprise for the Ms, is a wedding cake topper :p



Also I have just finished printing a fully articulated metal gear rex.
Ile get some pics up once its painted but that may be a while yet as theres lots of pieces!!

When I was printing Rex one of my box fans started getting noisy so I have ordered some new silent fans for that.
Fitted one but gotta wait a week for the other :(

I also fitted dampers to the X & Y steppers during the down time to help quieten it a bit and a new metal extruder.




And finally just because You always want to see finished pieces heres one I finished earlier:



So what you guys been making?

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3156
  • Last login:April 26, 2019, 02:25:09 pm
  • And to the death god we say, "Not today!"
Re: So ... 3d Printers....
« Reply #685 on: March 30, 2018, 12:11:21 pm »
Did you acetone smooth that PSP dock?  That looks great.

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #686 on: March 30, 2018, 01:36:40 pm »
Yeah I'd appreciate some more info.... finish looks top-notch.  Also do you have a link to that extruder?  I don't know if it's the humidity or what, but my filament has broke off while not in use 5 times this month.... I'm getting sick of taking the dang thing apart. 

05SRT4

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1081
  • Last login:Yesterday at 06:43:44 pm
  • Check out my Pow Pow
Re: So ... 3d Printers....
« Reply #687 on: March 30, 2018, 02:15:49 pm »
Yeah the PSP dock looks great, looks like its possibly sanded and painted. If not then hot Dayumm. I also put Dampners on my CR10, need to get the metal extruder set though.
What design software are you using?

Besides all the badge holders I have been making, I made a Bi-Pod adapter for my Ruger 10/22 rifle.

Keep up the good work man

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #688 on: March 30, 2018, 02:47:39 pm »
Yeah I'd appreciate some more info.... finish looks top-notch.  Also do you have a link to that extruder?  I don't know if it's the humidity or what, but my filament has broke off while not in use 5 times this month.... I'm getting sick of taking the dang thing apart. 

Yeah the PSP dock looks great, looks like its possibly sanded and painted. If not then hot Dayumm. I also put Dampners on my CR10, need to get the metal extruder set though.
What design software are you using?

Besides all the badge holders I have been making, I made a Bi-Pod adapter for my Ruger 10/22 rifle.

Keep up the good work man

Did you acetone smooth that PSP dock?  That looks great.

Cheers guys,

Yeah the PSP dock I made in sketchup, Its not an amazing designer if ime honest but its easy for someone like me to work with.
The finish was just sanded, Primed and painted with spray paint, But it needed it as it was printed at .2 where I normally print at .12

Howard, The extruder drive I replaced is this one:
https://www.amazon.co.uk/HICTOP-Upgraded-Replacement-Aluminum-Extruder/dp/B076LQ9TPZ/ref=sr_1_3?ie=UTF8&qid=1522435506&sr=8-3&keywords=hictop+extruder

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10271
  • Last login:Yesterday at 06:22:11 pm
  • boom
    • Arcade Madness
Re: So ... 3d Printers....
« Reply #689 on: March 30, 2018, 08:17:29 pm »
Drill guide for joysticks...  Happ standard and Sanwa JLF



Leaf switch holders:


Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #690 on: March 30, 2018, 09:44:31 pm »
Drill guide for joysticks...  Happ standard and Sanwa JLF



Leaf switch holders:



Nice idea!  You actually beat me to it on the joystick guide.  One suggestion..... the peg in the center... you might want to put a hole just big enough for a pencil/pen to fit.  That way if you are also drilling the hole for the joystick you'll have a mark for the pilot bit on your hole saw. 

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4354
  • Last login:Yesterday at 10:05:11 am
Re: So ... 3d Printers....
« Reply #691 on: March 30, 2018, 09:51:24 pm »
Those are cool.   :applaud:

Drill guide for joysticks...  Happ standard and Sanwa JLF



Leaf switch holders:





Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1317
  • Last login:January 22, 2020, 11:47:54 pm
  • Bitches love Centipede
Re: So ... 3d Printers....
« Reply #692 on: March 31, 2018, 12:05:30 am »
WTF do you need a drill guide for? Mr. CNCman...?
%Bartop

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #693 on: March 31, 2018, 01:37:17 am »
???  To drill the hole for the joystick when making a panel from scratch.  I thought that was pretty obvious. 

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #694 on: March 31, 2018, 06:05:50 am »
Cool idea

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #695 on: March 31, 2018, 06:35:01 am »

Just remembered btw Howard,

I noticed my filament breaks if I have not used the printer for a week or 2, usually just infront of the extruder gear.
I guess the gear puts pressure on it over time and it breaks.

What I do to fix it is pull the Bowden tube out of the coupling that comes out of the extruder, pull the remnants of the fillament through them heat up the hot end to 200 and give it a sharp tug back down the bowden tube.

Then just feed new back in as normal.


HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10271
  • Last login:Yesterday at 06:22:11 pm
  • boom
    • Arcade Madness
Re: So ... 3d Printers....
« Reply #696 on: March 31, 2018, 09:34:57 am »
Nice idea!  You actually beat me to it on the joystick guide.  One suggestion..... the peg in the center... you might want to put a hole just big enough for a pencil/pen to fit.  That way if you are also drilling the hole for the joystick you'll have a mark for the pilot bit on your hole saw.

Not a bad idea.  :cheers:

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1317
  • Last login:January 22, 2020, 11:47:54 pm
  • Bitches love Centipede
Re: So ... 3d Printers....
« Reply #697 on: March 31, 2018, 09:49:01 am »
???  To drill the hole for the joystick when making a panel from scratch.  I thought that was pretty obvious.

CNC... duh.
%Bartop

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10271
  • Last login:Yesterday at 06:22:11 pm
  • boom
    • Arcade Madness
Re: So ... 3d Printers....
« Reply #698 on: March 31, 2018, 10:16:18 am »
???  To drill the hole for the joystick when making a panel from scratch.  I thought that was pretty obvious.

CNC... duh.

I don't CNC everything all the time... 

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #699 on: March 31, 2018, 11:46:19 am »
???  To drill the hole for the joystick when making a panel from scratch.  I thought that was pretty obvious.

CNC... duh.

I don't CNC everything all the time...

I would if I had access to a CNC

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19181
  • Last login:Today at 02:20:23 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: So ... 3d Printers....
« Reply #700 on: March 31, 2018, 12:37:19 pm »
???  To drill the hole for the joystick when making a panel from scratch.  I thought that was pretty obvious.

CNC... duh.

I don't CNC everything all the time...

I would if I had access to a CNC

He doesnít have direct access, which is good, since he doesnít want MDF dust in his sandwiches.
***Build what you dig, bro. Build what you dig.***

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #701 on: March 31, 2018, 12:39:30 pm »
Ide totally be CNCing shapes in sarnies if I had the chance :p

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7521
  • Last login:Yesterday at 11:19:34 pm
  • Designated spam hunter
Re: So ... 3d Printers....
« Reply #702 on: March 31, 2018, 03:29:44 pm »
Drill guide for joysticks...  Happ standard and Sanwa JLF
If/when you update this drill guide with a center hole as suggested above, you may also want to add a triangular notch on the center of each side.

Align the notches to horizontal and vertical lines drawn on the panel and your sticks are both perfectly positioned and squarely aligned.   :cheers:


Scott

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #703 on: March 31, 2018, 07:06:52 pm »

Just remembered btw Howard,

I noticed my filament breaks if I have not used the printer for a week or 2, usually just infront of the extruder gear.
I guess the gear puts pressure on it over time and it breaks.

What I do to fix it is pull the Bowden tube out of the coupling that comes out of the extruder, pull the remnants of the fillament through them heat up the hot end to 200 and give it a sharp tug back down the bowden tube.

Then just feed new back in as normal.

Yeah there's gotta be an easier way though.  I've already added some g-code in my shutdown routine to push the bed out to present the finished part.... maybe if I add some code to back the filament up a bit it'll relieve some of the strain. 

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
So ... 3d Printers....
« Reply #704 on: April 07, 2018, 05:02:09 pm »
Got my extra fan last night and run my first print since the upgrade.

OMG what a difference those dampeners make! The X/Y motors are now almost silent!

And the print came out perfect

« Last Edit: April 07, 2018, 05:05:14 pm by Titchgamer »

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #705 on: April 07, 2018, 07:21:07 pm »
Yeah I need to invest in better bearings.  I've been looking into tool changes actually.... there have been a few a8 mods that allow for plotting, vinyl cutting and small scale cnc.  (Think pcb mill.)  I've just yet to see a carriage that looked sturdy enough for precision printing.  I think it is doable though.... I actually made a simple plotter attachment and it worked fine. 

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #706 on: April 08, 2018, 03:12:43 am »
Yeah I need to invest in better bearings.  I've been looking into tool changes actually.... there have been a few a8 mods that allow for plotting, vinyl cutting and small scale cnc.  (Think pcb mill.)  I've just yet to see a carriage that looked sturdy enough for precision printing.  I think it is doable though.... I actually made a simple plotter attachment and it worked fine.

Yeah ive seen a few options for my printer, Laser cutters/etching and CNC stuff.
Not something ime ever likely to consider seriously though tbh.

Anything that small ide get the guys at work to do for me on a night shift lol

But yeah totally do the fan/dampener mods to your printer if you can.
It really is a game changer!!


pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9116
  • Last login:Yesterday at 09:47:42 pm
  • Obey.
    • The Chris Burke Band
Re: So ... 3d Printers....
« Reply #707 on: April 08, 2018, 02:25:17 pm »
Alien Poker almost back to life.



Old and busted on the right, new hotness left.
This forum needs more threads about Arcade 1Up cabinets.

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #708 on: April 08, 2018, 02:58:19 pm »
Nice.  I look forward to seeing that pin back in action. 

So I found something useful:

https://www.thingiverse.com/thing:2070636

Ignore the part, that may or may not apply to you, but check out the program in the description.  That's what I've been looking for, an automated app to alter the gcode for x-axis plotting.  This would be useful for plotters, vinyl cutters and possibly even pcb milling.  See you need the code altered to basically keep the tool from dragging while moving about... it needs to retract for non 3d printing applications. 

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #709 on: April 08, 2018, 06:30:17 pm »
Good stuff PBJ!

Ive just finished printing a prototype winder and speed loader for my TMC mags.

Its a bit rough but functional so ime going to do some further testing then smoothe it out a bit :)

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #710 on: April 13, 2018, 04:24:47 pm »
So has anyone converted the anet a8 to use a Bowden style extruder?  I've been thinking about it since, in theory getting the weight off the carriage would eliminate wobble and increase the overall speed.  The only thing holding me back is the fact that I would have to print a new carriage.  I dunno, a pla carriage just doesn't seem like it would be sturdy. 

But I mean the conversion itself is stupidly cheap.... you can get a j-head hotend complete with Bowden conversion parts for around 10 bucks on amazon.  I just wonder if I'm wasting my time. 

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3156
  • Last login:April 26, 2019, 02:25:09 pm
  • And to the death god we say, "Not today!"
Re: So ... 3d Printers....
« Reply #711 on: April 13, 2018, 04:34:50 pm »
I'm sticking with direct drive since I plan on using flexible filaments soon.  Those don't work with a bowden setup.  If you are gonna stay with PLA, ABS, PetG, etc... I've heard bowden is great.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19181
  • Last login:Today at 02:20:23 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
So ... 3d Printers....
« Reply #712 on: April 13, 2018, 04:45:59 pm »
No interest. Iím fine with what mine does.
***Build what you dig, bro. Build what you dig.***

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #713 on: April 13, 2018, 09:12:41 pm »
I'm sticking with direct drive since I plan on using flexible filaments soon.  Those don't work with a bowden setup.  If you are gonna stay with PLA, ABS, PetG, etc... I've heard bowden is great.

I would like the option to do ninjaflex and stuff but honestly I can't think of a use for it.  I'm trying to design a changeable head system as I'd really like to do a drag knife for vinyl and a laser for engraving and this just seemed like it would make the whole thing easier, but if my prints are going to suffer for it no dice.  I'm open to suggestions. 

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #714 on: April 13, 2018, 11:51:16 pm »
So this is pretty cool:

https://hackaday.com/2018/04/13/resuming-failed-3d-prints-automatically/

If the cost isn't terribly high this would be really nice for those 15 hour prints. 

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3575
  • Last login:Today at 01:49:40 am
  • I have a gaming addiction.....
Re: So ... 3d Printers....
« Reply #715 on: April 14, 2018, 01:52:34 am »
Sounds interesting that!
I wonder how it knows if you got spaghetti going on though??

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7521
  • Last login:Yesterday at 11:19:34 pm
  • Designated spam hunter
Re: So ... 3d Printers....
« Reply #716 on: April 14, 2018, 07:50:43 pm »
PBJ just confirmed that several prints of v0.03 of the Williams Drop Target Guide (P/N 03-7479 or 3B-7479) are installed and working in his Alien Poker.
- v 0.03 - Narrowed columns, adjusted ramp, adjusted position of wall near ramp, enlarged bottom screw hole 10 Apr 18
- v 0.02 - Changed default screw hole sizes 27 Mar 2018
- v 0.01 - First draft 27 Mar 2018

This SCAD file recreates and remixes the model posted here on Thingiverse by Haruman's friend.
 - Corrections to that part are based on measurements of original parts
 - PCB columns changed to ovals for greater strength
 - Inspected by PBJ for accuracy and suitability

This part is used in Williams System 3-6 tables.

Planetary Pinball has online copies of Bally and Williams parts catalogs here.

The Williams 1980 catalog here contains related parts diagrams.

Drop target assemblies are on pages 113-118 -- they all use the 03-7479 guide.

The D-8362 assembly diagram on page 116 shows PCB screws that are the same P/N as the horseshoe screws. (4104-1001-06)

Drop target assemblies that use the 03-7479 guide:
     D-7931-#s  -  # = number of targets (between 1 and 5)
     D-8362     -  5 targets
     D-8442     -  3 targets
     D-9355     -  3 targets

Screw sizes:
 - #6-32 x 3/4" machine screw
 - #4 sheet metal screw

The attached .ZIP file contains the .SCAD file (you can modify the part using OpenSCAD) and .STL file.

Print with supports and your choice of filament -- the ones I sent to PBJ are Hatchbox PLA.


Scott
« Last Edit: April 14, 2018, 08:11:40 pm by PL1 »

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9116
  • Last login:Yesterday at 09:47:42 pm
  • Obey.
    • The Chris Burke Band
Re: So ... 3d Printers....
« Reply #717 on: April 14, 2018, 10:40:14 pm »




 :cheers:

This forum needs more threads about Arcade 1Up cabinets.

Howard_Casto

  • Idiot Police
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18031
  • Last login:Yesterday at 11:17:58 pm
  • Your Post's Soul is MINE!!! .......Again??
    • The Dragon King
Re: So ... 3d Printers....
« Reply #718 on: April 14, 2018, 11:06:11 pm »
So did you screw right into the holes or did you have to tap them first?  I'm only asking because I've had mixed success in regards to screwing into pla without it splitting.... seems to depend upon the model greatly. 

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9116
  • Last login:Yesterday at 09:47:42 pm
  • Obey.
    • The Chris Burke Band
Re: So ... 3d Printers....
« Reply #719 on: April 15, 2018, 12:15:02 am »
Screwed right in.

This part is unobtainium, other collectors I know are happy to see this come to fruition.  Found out one of my mosfets is blown on my $300 repro MPU.  But thatís another thread.

This forum needs more threads about Arcade 1Up cabinets.