Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Switching J-stik between 4/8 way  (Read 1192 times)

0 Members and 1 Guest are viewing this topic.

dbldown768

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:February 02, 2020, 05:19:53 pm
  • I want to build my own arcade controls!
Switching J-stik between 4/8 way
« on: October 11, 2016, 08:49:16 am »
This might seem like a silly question but I have 2 jstiks from ultimarc and it seems to take some effort to switch between 8/4 way modes. There are 4 screws on the bottom that have some springs on them. All of them are pretty loose. Does it typically take a bit of effort to turn? Or am I doing something wrong.

Sent from my Nexus 5 using Tapatalk


Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4222
  • Last login:December 17, 2023, 08:05:48 am
  • I have a gaming addiction.....
Re: Switching J-stik between 4/8 way
« Reply #1 on: October 11, 2016, 09:05:29 am »
You should be able to turn it with 1 hand using little effort.