Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: G27 or L2M2 for new race cab?  (Read 2007 times)

0 Members and 1 Guest are viewing this topic.

charliew

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:February 07, 2020, 08:31:12 pm
  • I want to build my own arcade controls!
G27 or L2M2 for new race cab?
« on: August 04, 2016, 03:51:00 pm »
Which one would you recommend for a new cab build? I want to use a PS3 and also a computer for my cab so I can unfortunately not use SailorSat's Arduino based conversion.
Will a hacked Logitech Driving Force EX work well with Windows games or are there any known issues? I suppose Profiler will work with both.
I don't care about 900 degrees rotation and such. I will not play any sim games. In the end I think that both solutions will cost about the same...
Logged

SailorSat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1243
  • Last login:Yesterday at 09:43:10 pm
    • For Amusement Only e.V.
Re: G27 or L2M2 for new race cab?
« Reply #1 on: August 04, 2016, 04:11:00 pm »
The L2M2 does not support the "clutch"-feature. Though most people won't notice them anyway :)
Logged
I do all that stuff even without a Joystick ;)
Soft-15kHz, cabMAME, For Amusement Only e.V.

Pages: [1]
  
Go Up
« previous next »