Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Possible neck crack help on D9200  (Read 1753 times)

0 Members and 1 Guest are viewing this topic.

Vincefaro

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 207
  • Last login:July 17, 2025, 11:40:56 am
  • I want to build my own arcade controls!
Possible neck crack help on D9200
« on: April 14, 2016, 12:13:21 pm »
I'm trying to diagnose a problem
With a wells Gardner D9200 that is not working I keep frying  neck boards . I have a new chassis and neck board but Chad from arcade cup said I may have a fracture in the neck , the only thing I see is a scuff right by the white tape that is by the two holes in the tape . Could that be it ?
« Last Edit: April 14, 2016, 12:17:56 pm by Vincefaro »
Logged

Vincefaro

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 207
  • Last login:July 17, 2025, 11:40:56 am
  • I want to build my own arcade controls!
Re: Possible neck crack help on D9200
« Reply #1 on: April 14, 2016, 12:14:44 pm »
Another
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 16, 2025, 06:33:55 pm
Re: Possible neck crack help on D9200
« Reply #2 on: April 14, 2016, 06:25:27 pm »
what components were burning out?
Logged

Vincefaro

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 207
  • Last login:July 17, 2025, 11:40:56 am
  • I want to build my own arcade controls!
Re: Possible neck crack help on D9200
« Reply #3 on: April 15, 2016, 11:25:10 am »
The g2 pin on the neck board .
Logged

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: Possible neck crack help on D9200
« Reply #4 on: April 15, 2016, 11:36:11 am »
grid 2 ?

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:July 17, 2025, 05:36:09 pm
  • I break stuff...then fix it...sometimes
Re: Possible neck crack help on D9200
« Reply #5 on: April 15, 2016, 02:39:08 pm »
maybe an internal G2 short. possibly fixable with a rejuvenator.

could also just be a bad/corroded/lose connection on the pin caused overheating and localized burning.

cracked necks are usually pretty obvious. I highly doubt this is your issue.
Logged

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: Possible neck crack help on D9200
« Reply #6 on: April 15, 2016, 05:03:15 pm »
well i was leading towards a short..
just want to get to the how the @ came up with g2?

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

Vincefaro

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 207
  • Last login:July 17, 2025, 11:40:56 am
  • I want to build my own arcade controls!
Re: Possible neck crack help on D9200
« Reply #7 on: April 15, 2016, 08:55:09 pm »
I think a short is good news , not a cracked neck yes?  Any suggestions for troubleshooting?
« Last Edit: April 15, 2016, 08:56:50 pm by Vincefaro »
Logged

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: Possible neck crack help on D9200
« Reply #8 on: April 15, 2016, 10:12:30 pm »
olny a person with a picture tube chker can now tell u.
short good,crack neck no good

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.
Pages: [1]
  
Go Up
« previous next »