Author Topic: 3 Volt Battery on Mortal Kombat 2 board? (Read 3780 times)

Sylentwulf · « **on:** January 14, 2004, 02:17:30 pm »

On the mortal Kombat 2 board (And probably many other boards) there is a 3v "watch battery". Without going and finding it, I wanna say a BR2325.

Question is, I can't seem to find a repalcement battery. I have plenty of CR2032 Battery's that are also Lithium 3V and roughly the same size.

Since the voltages are the same, and it looks like it will fit in there, is it ok to use the CR2032 as a substitute, or should I make sure to use the same replacement battery?

Thanx!

menace · « **Reply #1 on:** January 14, 2004, 02:32:21 pm »

I'm going to go out on a limb and say that if the voltages and amperages match then its ok. i did this with my laptop cmos battery and it works fine. you could also google the two battery numbers and see the various specs that are out there, and see if there's any discrepancies.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: 3 Volt Battery on Mortal Kombat 2 board? (Read 3780 times)

Sylentwulf

3 Volt Battery on Mortal Kombat 2 board?

menace

Re:3 Volt Battery on Mortal Kombat 2 board?