Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Aimtrak - Mame and PCSX2 on the same cab  (Read 1826 times)

0 Members and 1 Guest are viewing this topic.

grunger106

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:November 25, 2016, 10:48:24 am
Aimtrak - Mame and PCSX2 on the same cab
« on: March 02, 2016, 01:32:52 pm »
Hi

I've got an AimTrak gun and its working great in MAME and HOTD (PC) - and has been for 2 years
I'm now considering putting PCSX2 (with the Nuvee plugin) on my cab to play TimeCrisis2/3/CZ, since it doesn't look like MAME will support those for a while!

The documentation on this seems a little hazy and seemed to require using TopGun drivers, presumably that would screw up my working MAME/PC config?
However, the info I can find is a few years old now - is it still the case?

Thanks for any help!
« Last Edit: March 28, 2016, 12:43:08 pm by grunger106 »

TimeCrisis

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 153
  • Last login:July 22, 2023, 04:32:47 am
  • I want to build my own arcade controls!
Re: Aimtrak - Mame and PCS2X on the same cab
« Reply #1 on: March 06, 2016, 12:06:36 am »
I play pcsx2 games with arimtrak, you just use nuvee, no topgun drivers required.

i switch between that and mame games that i use for time crisis 1, everything works really well.

grunger106

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:November 25, 2016, 10:48:24 am
Re: Aimtrak - Mame and PCSX2 on the same cab
« Reply #2 on: March 28, 2016, 12:45:49 pm »
How exactly did you configure the plugin?
In MAME everything is fine,
However I can't get it to work reliably or properly in the PCSX2 - neither button on the aimtrack works (trigger is OK) and the calibration seems miles off whatever I do!
Any advice would be awesome :)

TimeCrisis

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 153
  • Last login:July 22, 2023, 04:32:47 am
  • I want to build my own arcade controls!
Re: Aimtrak - Mame and PCSX2 on the same cab
« Reply #3 on: March 29, 2016, 06:33:02 am »
try to mess wit the figures in nuvee, the ones with 3 numbers, like 172 etc. calibrate it by aiming at the screen at the calibration menu, that's all i can help with.

in the mean time get demul and play house of the dead 2 and confidential mission

get dolphin and use that to play house of the dead 3.

those setups should be easier.