Author Topic: Happs small Illuminated buttons..hole size? (Read 832 times)

alphasqorner · « **on:** January 11, 2004, 10:50:19 pm »

Just wondering what the hole size (diamater) cut should be for happs illuminated pusdbuttons, small. Does anyone know?

crashwg · « **Reply #1 on:** January 11, 2004, 11:02:49 pm »

The site says .97 I think (it's blurry), but it has a little notch so I don't know what you have to do about that.

Ken Layton · « **Reply #2 on:** January 11, 2004, 11:47:16 pm »

It's 1" hole and you'll have to file a slight notch for the index peg.

alphasqorner · « **Reply #3 on:** January 12, 2004, 01:00:47 am »

I saw the .97 too, but wasn't sure what it meant. Guess 1 inch is it! Thanks again!!!!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news