Author Topic: X Arcade Joystick Hole Size? (Read 1566 times)

R0CK632 · « **on:** November 30, 2015, 12:28:54 pm »

Got the DIY X Arcade kit, and I know the Buttons are 1 1/8" in size, but is the Joystick Hole the same size? Thanks

Slippyblade · « **Reply #1 on:** November 30, 2015, 12:49:00 pm »

Close enough. I've always just used a button hole to mount joysticks, including the X-Arcade ones.

DeLuSioNal29 · « **Reply #2 on:** November 30, 2015, 01:32:26 pm »

+1. I like to make them the same size.

D

paigeoliver · « **Reply #3 on:** November 30, 2015, 10:54:32 pm »

Joystick holes can be 1" depending on application, but I always just go with the 1 1/8" anyway, even when the 1" would work.

DeLuSioNal29 · « **Reply #4 on:** December 01, 2015, 03:45:12 pm »

It really depends on whether you're working with wood or metal. Wood joysticks usually have a longer throw, so require the bigger hole. 1-1/8"


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news