Jpac standoffs

[keilmillerjr]

Can anyone help me find a size or source for pcb standoffs for my jpac? I can't find my caliper right now, so I'm not sure of the pcb hole size. Mounting surface is 3/16 inch. Standoff can me hard mounted or adhesive backed. I ordered some adhesive ones and they were too large.

[DeLuSioNal29]

Do you need something like this?   My thought is that you could use PC screws to fasten the plastic parts to the metal bracket using standoffs.

http://www.ebay.com/itm/Arcade-Game-Board-Legs-25-PCB-Mounting-Feet-Jamma-Multicade-Pinball-etc-/252150368615?hash=item3ab5554967

If so, I have many left and you are welcome to have what you need for your project...  (I'll even send metal motherboard standoffs and screws just in case.  I have tons.)


PM me your mailing address.

DeLuSioNaL29

[DeLuSioNal29]

Forgot to note:  I also have a bulk pack of these.  As a backup solution, you can zip tie the PCB to these standoffs, and then stick them to the Metal.


DeLuSioNaL29

[pbj]

Steal a few of these from work and cut to size.

[DeLuSioNal29]

+1.  Bic pens have saved me in a pinch and they work well.   

D

[keilmillerjr]

Spent time looking for a solution, yet the solution was right in front of me. Took a small round file and widened the hole slightly to fit my 0.119" to 0.125" self adhesive pcb stand offs. Problem solved.

Excuse my mess on the table.

[DeLuSioNal29]

Oh OK, so you widened the holes on the PCB itself.   

Glad you found a solution!

D

[Slippyblade]

I just with the adhesive stand-offs weren't so expensive. 

[keilmillerjr]

I just with the adhesive stand-offs weren't so expensive. 

They are expensive, relative to other items. However, for a total of $4 I now have an easy solution that is nice and neat. This mame setup is going in my neo geo mvs. I want everything easily removable to preserve it. BTW- This mame setup will only run neo geo games.

PCB Standoffs - Nylon Locking - Self Adhesive - 0.119" to 0.125" Hole - 8pack