Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Help Identifying I/O Boards  (Read 790 times)

0 Members and 1 Guest are viewing this topic.

xodaraP

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 28, 2018, 02:26:20 pm
  • I want to build my own arcade controls!
Help Identifying I/O Boards
« on: September 11, 2015, 07:52:36 am »
Hi guys,

I'm trying to get a JVS-PAC setup on my Cyber Lead cab and not having any luck, so I'm hoping someone can identify these I/O boards so I can find out if they are known to not work with the JVS-PAC or if the JVS-PAC/USB cable is faulty. The bottom picture is of the board behind the control panel. Behind the 2 USB cables (I left them plugged in so it stayed powered on) says "Namco JVS Amigo PCB" on it. The other board is directly above the power supply on the back, has 3 VGA/HD-15 cords plugged into it (2 seem to be input, 1 is output to the monitor), and 3 USB cables (1 to JVS/JAMMA adaptor on the front, this is the USB I'm using, 2 more to the other board I've taken a photo of)



And