Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Happs 27" bezel doesn't fit WG 9200???  (Read 1515 times)

0 Members and 1 Guest are viewing this topic.

Negativecreep0

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 353
  • Last login:November 28, 2020, 10:59:49 am
  • I'm a llama!
Happs 27" bezel doesn't fit WG 9200???
« on: January 04, 2004, 10:55:31 am »
Hey i was looking at the dimensions of the Wells Gardner 9200 and it is  24.4 inches wide and about 20.6 inches tall. Now the Happs bezel according to someone's web page is only 21.25 inches wide and 16.25 inches high in the viewable area for a 27 inch monitor. How can this be if it is supposed to be for a 27" monitor, its gonna cut a lot of the viewable screen out. Any help or suggestions in terms of buying monitor bezels?
Logged

daeven

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
  • Last login:July 15, 2022, 12:17:33 pm
  • Llama this!
Re:Happs 27" bezel doesn't fit WG 9200???
« Reply #1 on: January 04, 2004, 01:53:45 pm »
I have this exact combination and mine fits fine.  It's behind glass, but I measure approx. 21" wide of viewable screen on my 27" viewable (diagonal) D9200.  Is the 24" width the width of the whole monitor including mounting brackets?
 
Logged

JustMichael

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1438
  • Last login:September 27, 2015, 01:19:40 am
  • Mmmmm!! Cheesecake!!
Re:Happs 27" bezel doesn't fit WG 9200???
« Reply #2 on: January 04, 2004, 07:57:52 pm »
Well the dimensions of 21.25"x16.25" will yield a diagonal of ~26.75".
Logged

Vincefaro

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 207
  • Last login:July 17, 2025, 11:40:56 am
  • I want to build my own arcade controls!
Re: Happs 27" bezel doesn't fit WG 9200???
« Reply #3 on: October 28, 2015, 05:00:22 pm »
So does this fit a Wells Gardner 27  D9200?


https://na.suzohapp.com/products/monitors/49-1857-00
Logged

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re: Happs 27" bezel doesn't fit WG 9200???
« Reply #4 on: October 29, 2015, 10:39:43 pm »
27" 4:3 tubes are all the exact same size. 27" standard bezels all fit those tubes.

Where you might run into problems is that in the 2000-2010 era there also existed flat tubed 27" monitors and a variety of lcds.
Logged
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

nipsmg

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1753
  • Last login:August 12, 2025, 01:55:47 pm
  • ROONEY!! ERRGH!!
    • Arcadia
Re: Happs 27" bezel doesn't fit WG 9200???
« Reply #5 on: October 30, 2015, 01:03:02 pm »
Quote from: Vincefaro on October 28, 2015, 05:00:22 pm
So does this fit a Wells Gardner 27  D9200?


https://na.suzohapp.com/products/monitors/49-1857-00

No, that's a monitor bezel for a flat monitor.

I have been unable to find a replacement for my cracked 27" 4:3 non-flat monitor bezel.
If anyone has a link, let me know.  I can no longer find it on the suzohapp site.
Logged
Pages: [1]
  
Go Up
« previous next »